标准光�？�
1.25G-SFP-550D
Description
Product Description
1.25G-SFP-550D is Multi-Vendor MSA Compatible Multimode 1000Base-SX SFP (Small Form factor Pluggable) Transceiver, operating over Double Fiber Multi-Mode Fiber (MMF) optical cable. It has minimum guaranteed optical budget of 7.5 dB, with in most cases is enough to reach about 550 m 1000base-SX distance. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This transceiver uses top quality VSCEL Laser transmitter with operating at nominal wavelength 850 nm. and 850 nm. PIN Photodiode receiver. It supports DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. 1.25G-SFP-550D MMF SFP operates in Standard 0°-70°C temperature range and has Double LC interface. SFP support 1.063-1.25Gbps data rate and such applications as Gigabit Ethernet (1.25 Gbps) |1G Fiber Channel (1.0625 Gbps). 1.25G-SFP-550D SFP Double Fiber optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular applications are Internet Service Provider (ISP) Gigabit Ethernet communication links, Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks and other optical links.
This 1000Base-SX SFP transceiver is CE/RoHS certified and it is Compliant with product safety standards. 1.25G-SFP-550D SFP Transceiver is fully compliant to SFP Multi Source Agreement INF-8074i. Consequently, it means that module is compatible with 80% of networking equipment, where is not implemented a special algorithm for protection against third party modules. However – we can provide SFP transceiver with custom-encoded firmware in order to make it work almost in any equipment. Therefore, we will be glad to know what your requirement is. Because our focus is providing top quality service, we are performing serious quality checks before delivery of our products. As a result, we do optical parameter measurements, connector cleanness tests and SFP transceiver EEPROM memory data validation tests.
| Media Type: |
Multi-Mode Fiber (MMF) |
|---|---|
| TX Wavelength: |
850 nm. |
| RX Wavelenght: |
850 nm. |
| Minimum Optical Budget: |
7.5 dB |
| Maximum Distance: |
550m |
| Supported Data Rate: |
1.063-1.25Gbps |
| Supported Applications: |
Gigabit Ethernet (1.25 Gbps), 1G Fiber Channel (1.0625 Gbps) |
| DDM/DOM: |
Support |
| Temperature Range: |
Standard 0°-70°C |
| Connectors: |
Double LC |
| Tx Wavelength Bandwidth: |
20 nm (840-860 nm) |
| Rx Wavelength Bandwidth: |
20 nm (840-860 nm) |
| Minimum Transmitting Power: |
-9.5 dB |
| Maximum Transmitting Power: |
3 dB |
| Receiver Sensitivity: |
-17 dBm |
| Receiver Overload: |
-3 dBm |
| Dispersion: |
110 ps/nm |
| Transmitter Type: |
VSCEL Laser |
| Receiver Type: |
PIN photodiode |
| Power: |
+3.3V single power supply |
| Chipset: |
MAXIM, MINDSPEED, SEMTECH |
| Compliance: |
CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, INF-8074i, RoHS, SFP MSA |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
1.25G-SFP-120D
1.25G-SFP-120D
1.25G-SFP-120D is Multi-Vendor MSA Compatible SFP (Small Form factor Pluggable) Transceiver, operating over Double Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 32 dB, with in most cases is enough to reach about 120 km distance. However, distance is just indicative parameter calculated for comfort of identification.
1.25G-SFP-150D
1.25G-SFP-150D
1.25G-SFP-150D is Multi-Vendor MSA Compatible SFP (Small Form factor Pluggable) Transceiver, operating over Double Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 37 dB, with in most cases is enough to reach about 150 km distance. However, distance is just indicative parameter calculated for comfort of identification.
1.25G-SFP-20D
1.25G-SFP-20D
1.25G-SFP-20D is Multi-Vendor MSA Compatible SFP (Small Form factor Pluggable) Transceiver, operating over Double Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 13 dB, with in most cases is enough to reach about 20 km distance. However, distance is just indicative parameter calculated for comfort of identification.
1.25G-SFP-2D
1.25G-SFP-2D
1.25G-SFP-2D is Multi-Vendor MSA Compatible SFP (Small Form factor Pluggable) Transceiver, operating over Double Fiber Multi-Mode Fiber (MMF) optical cable. It has minimum guaranteed optical budget of 13 dB, with in most cases is enough to reach about 2 km distance. However, distance is just indicative parameter calculated for comfort of identification.
1.25G-SFP-40D
1.25G-SFP-40D
1.25G-SFP-40D is Multi-Vendor MSA Compatible SFP (Small Form factor Pluggable) Transceiver, operating over Double Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 18 dB, with in most cases is enough to reach about 40 km distance.
1.25G-SFP-41D
1.25G-SFP-41D
1.25G-SFP-41D is Multi-Vendor MSA Compatible SFP (Small Form factor Pluggable) Transceiver, operating over Double Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 17 dB, with in most cases is enough to reach about 40 km distance. However, distance is just indicative parameter calculated for comfort of identification.