标准光�？�
100G-CFP-150
Description
Product Description
100G-CFP-150 is Multi-Vendor MSA Compatible 100GBASE-SR10 CFP (Centum Form Factor Pluggable) Transceiver, operating over pair of multi-mode optical fiber. Module has minimum guaranteed optical budget of 1.9 dB, which in most cases is enough to reach 150 m over OM4 multi-mode fiber, or 100 m over OM3 multi-mode fiber. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. 100G-CFP-150 use 10 x VCSEL (Vertical Cavity Surface Emitting Laser) transmitters operating at nominal wavelength 850 nm and 10 x 850 nm PIN Photodiode receivers. Module support DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. 100G-CFP-150 module requires Single 3.3V Power Supply and has less then 7W power consumption. Module operates in Standard 0°-70°C temperature range, and for interconnections requires standard 24/20 lane optical fiber with MTP/MPO connector.
| Media Type: |
Multi-Mode Fiber (MMF) |
|---|---|
| Connectors: |
MTP/MPO |
| TX Wavelength: |
850 nm. |
| RX Wavelenght: |
850 nm. |
| Minimum Optical Budget: |
1.9 dB |
| Maximum Distance: |
150m |
| Supported Data Rate: |
103.125-111.81 Gbps |
| Supported Applications: |
100G Ethernet (103.125Gbps), OTU4 4l1-9D1F (112 Gbps) |
| DDM/DOM: |
Supported |
| CDR (Clock and Data Recovery) chip |
Supported |
| Transmitter Type: |
VSCEL Laser |
| Tx Wavelength Bandwidth: |
20 nm (840-860 nm) |
| Transmit Power Per Lane (Min): |
-7.6dBm |
| Receiver Type: |
PIN |
| Rx Wavelength Bandwidth: |
20 nm (840-860 nm) |
| Average Receiver Sensitivity (Min) Each Lane: |
-9.5 dBm |
| Receiver Overload: |
Each Lane 3.4 dB |
| Temperature Range: |
Standard 0°-70°C |
| Storage Temperature: |
-40° to 85°C |
| Relative Humidity: |
0 to 85% |
| Power Consumption: |
≤7.0W |
| Power: |
+3.3V |
| Chipset: |
MAXIM, MINDSPEED, SEMTECH, Sumitomo |
| Compliance: |
CFP MSA, IEC60825-1 Laser Safety Compliant, IEEE 802.3ba 100GBASE-SR10, SFF-8419, CE, RoHS, SFF-8636 |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
100G BASE-LR4/OTU4 CFP Transceiver
100G BASE-LR4/OTU4 CFP Transceiver
FT-MTRC-DG3CA CFP transceivers are designed for use in 100Gigabit Ethernet links and OTU4 over 10km single module fiber, and it compliant to the CFP MSA and IEEE 802.3ba 100GBASE-LR4. Digital diagnostics are available via MDIO as specified in the CFP MSA Management Interface Specification.
2x100G QSFP28-DD
2x100G QSFP28-DD
100G CFP4
100G CFP4
F-tone Networks CFP4-100GBASE-LR4 and CFP4-100GBASE-ER4 module supports a link length of 10, 20 and 40km on standard single-mode fiber (SMF, G.652). 100 Gigabit Ethernet signal is carried over four wavelengths.
100G CFP2
100G CFP2
F-tone Networks CFP2-100GBASE-LR4 / CFP2-100GBASE-ER4 module supports a link length of 10, 20, 25 and 40km on standard single-mode fiber (SMF, G.652). 100 Gigabit Ethernet signal is carried over four wavelengths.
100G-CFP2-40
100G-CFP2-40
100G-CFP2-40 is Multi-Vendor MSA Compatible CFP2 (C (centum) Form Factor Pluggable 2) Transceiver, operating over 4 Parallel Lanes of Double Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 18 dB, with in most cases is enough to reach about 40 km distance.