100GBASE-SR4 QSFP28 to 2x QSFP28 Active Optical Cable
Features
¨ 4 channels full-duplex transceiver modules
¨ Transmission data rate up to 28Gbps per channel
¨ Support 40GE and 56G FDR data rate
¨ 4 channels 850nm VCSEL array
¨ 4 channels PIN photo detector array
¨ Internal CDR circuits on both receiver and transmitter channels
¨ Support CDR bypass
¨ Low power consumption : QSFP28-100G < 2.5W and QSFP28-50G <1.6W
¨ Hot Pluggable QSFP form factor
¨ Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF
¨ Single MPO connector receptacle
¨ 3.3V power supply voltage
¨ RoHS 6 compliant(lead free)
¨ Case operating temperature
Commercial:0 ~ +70¡æ
Industrial:-40 ~ +85¡æ
Applications
¨ IEEE 802.3bm 100GBASESR4 and 40GBASE SR4
¨ Infiniband FDR/EDR
¨ 32G Fiber Channel
Description
F-tone Networks QSFP28 to 2 x QSFP28 breakout Active Optical Cable is a Four-Channel, Parallel, Fiber-Optic QSFP28SR4 for 100 or 40 Gigabit Ethernet , Infiniband FDR/EDR and 32GFC Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 112.2 Gbps bandwidth. Each lane can operate at 28.05Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber.These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector. This module incorporates F-tone Networks Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Ordering information
Part Number |
Product Description |
FTQ2-HG-2Q2-Oxx |
QSFP28 to 2 x QSFP28, 100GBASE-SR4,Active Optical Cable 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 Low power version,0ºC ~ +70ºC |
FTQ2-HG-2Q2-OxxI |
QSFP28 to 2 x QSFP28, 100GBASE-SR4,Active Optical Cable 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 Low power version,-40ºC ~ +85ºC |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must bespecifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.