标准光�？�
10G Ethernet 9.95 ~ 11.1Gb/s 1310 10km SFP+ Optical Transceiver
Description
The FT-BE-F1305 SFP+ transceiver is intended for 10km reach service form 9.95Gb/s to 10.5Gb/s 1310nm single mode high-speed communications equipment.It is offered in the commercial and industrial temperature ranges. They are compliant with IEEE802.3ae 10GBASE
| Part Number | Package | Interface | Reach | Temp | Fiber Type | Wavelength | Rate | Tx Output | Rx Input |
|---|---|---|---|---|---|---|---|---|---|
| FT-BE-F1305-BC+ FT-BE-F1305-BH+ |
SFP+ | LC | 10km | C,H | Single-mode | 1310nm | 9.83Gb/s | -8.2~0.5dBm | -14.4dBm |
Features
● RJ-45 interface
● 10km SMF
● 9.95Gb/s to 10.5Gb/s(GN1157)
● power consumption:1.5W
● Standards
802.3ae
SFP MSA
注：本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
10 SDH/SONET 1550nm 9.953Gb/s to 11.1Gb/s 40km SFP+ Optical transceiver
10 SDH/SONET 1550nm 9.953Gb/s to 11.1Gb/s 40km SFP+ Optical transceiver
The FT-BE-F1503 SFP+ transceiver is intended for 40km reach service from 9.953Gb/s to 11.1Gb/s 1550nm single mode high-speed communications equipment where low-cost, extraordinary performance and reliability are essential.
10G Ethernet 1550nm 8.5G to 10.5Gb/s 40km SFP+ Optical transceiver
10G Ethernet 1550nm 8.5G to 10.5Gb/s 40km SFP+ Optical transceiver
The FT-BE-F1503 SFP+ transceiver is intended for 40km reach service from 8.5G to 10.5Gb/s 1550nm single mode high-speed communications equipment where low-cost, extraordinary performance and reliability are essential.
Symmetrical 9.953Gbps OLT SFP+ NG-PON2 OLT Transceiver
Symmetrical 9.953Gbps OLT SFP+ NG-PON2 OLT Transceiver
The FT-BE-F627X is intended for NG-PON2 OLT application in four separate SFP+ housing. It is a series modules and each module is configured with a L-band 9.95328Gbps downstream transmitter and a C-band 9.95328Gbps upstream receiver which work in TDM configuration.
CWDM 4x25Gb/s 2km QSFP28 Optical Transceiver
CWDM 4x25Gb/s 2km QSFP28 Optical Transceiver
9.83Gb/s CPRI 850nm 300m SFP+ Optical Transceiver
9.83Gb/s CPRI 850nm 300m SFP+ Optical Transceiver
The FT-BE-F8502 SFP+ transceiver is intended for 300m reach service from 9.83Gb/s 850nm multi mode highspeed
10G Ethernet 2.0 to 10.5Gb/s 1310 1.4km SFP+ Optical Transceiver
10G Ethernet 2.0 to 10.5Gb/s 1310 1.4km SFP+ Optical Transceiver
The FT-BE-F1303 SFP+ transceiver is intended for 1.4km reach service from 2.0Gb/s to 10.5Gb/s 1310nm single mode high-speed communications equipment.It is offered in the commercial and industrial temperature ranges. They are compliant with IEEE802.3ae-2002,