高速线缆
10G SFP+有源电缆
Description
F- tone公司专业研发制造10G SFP+有源电缆、10G SFP+ Active Cable,切合MSA SFF-8431, 应用于10G以太网等数据中心互联场景 。100%完美兼容全系列品牌效劳器,交换机,路由器,PDH/SDH传输设备,EPON,GPON,10G EPON,10G GPON,WDM PON基站等等全系列设备
SFP+ Direct Attach Active Copper Cables ,5m、7m、10m、12m Reach
Features
- Support for multi-gigabit data rates up to 10.5Gbps
- Data rates backward compatible to 1Gbps
- Hot-pluggable SFP 20PIN footprint
- I/O Connector designed for high speed differential signal applications
- Improved Pluggable Form Factor(IPF) compliant for enhanced EMI/EMC performance
- Low Power Consumption < 0.5W
- Power Supply :+3.3V
- Compatible to SFP+
- Temperature Range: 0~ 70 °C
- RoHS Compatible
Applications
- High capacity I/O in Storage Area Networks, Network Attached Storage, and Storage Servers
- Switched fabric I/O such as ultra high bandwidth switches and routers
- Data center cabling infrastructure
- High density connections between networking equipment
Product Description
The SFP+ active cable assemblies are high performance, cost effective I/O solutions for 10Gb Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget. The high speed cable assemblies meet and exceed Gigabit Ethernet and Fiber Channel industry standard requirements for performance and reliability.
Recommended Operating Conditions
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Storage Ambient Temperature |
-40 |
+85 |
°C |
||
|
Operating Case Temperature |
Tc |
0 |
+70 |
°C |
|
|
Power Supply Voltage |
VCC3 |
3.14 |
3.3 |
3.47 |
V |
|
Power Dissipation |
PD |
0.5 |
W |
Systems
|
Performance |
Media |
Operating parameters |
|
10.5Gbps line speed, full duplex Bit error rate: better than 10E-12 |
Hot-pluggable, industry-standard Small Form-Factor Pluggable(SFP+) copper cable, available max 10m |
Supply voltage: 3.3V Power consumption(per end): max 0.5W |
Pin Descriptions
|
Pin |
Logic |
Symbol |
Name/Description |
Notes |
|
1 |
VeeT
|
Transmitter Ground
|
||
|
2 |
LV-TTL-O |
TX_Fault |
N/A |
1 |
|
3 |
LV-TTL-I |
TX_DIS |
Transmitter Disable |
|
|
4 |
LV-TTL-I/O |
SDA |
Tow Wire Serial Data |
|
|
5 |
LV-TTL-I |
SCL |
Tow Wire Serial Clock |
|
|
6 |
MOD_DEF0 |
Module present, connect to VeeT |
||
|
7 |
LV-TTL-I |
RS0 |
N/A |
1 |
|
8 |
LV-TTL-O |
LOS |
LOS of Signal |
|
|
9 |
LV-TTL-I |
RS1 |
N/A |
1 |
|
10 |
VeeR |
Reciever Ground |
||
|
11 |
VeeR |
Reciever Ground |
||
|
12 |
CML-O |
RD- |
Reciever Data Inverted |
|
|
13 |
CML-O |
RD+ |
Reciever Data Non-Inverted |
|
|
14 |
VeeR |
Reciever Ground |
||
|
15 |
VccR |
Reciever Supply 3.3V |
||
|
16 |
VccT |
Transmitter Supply 3.3V |
||
|
17 |
VeeT |
Transmitter Ground |
||
|
18 |
CML-I |
TD+ |
Transmitter Data Non-Inverted |
|
|
19 |
CML_I |
TD- |
Transmitter Data Inverted |
|
|
20 |
VeeT |
Transmitter Ground |
1. Signals not supported in SFP+ Copper pulled-down to VeeT with 30K ohms resistor
Ordering information
|
Part Number |
Product Description |
|
SFP-10GAC-5 |
SFP+ Direct Attach Active Cable(10GSFP+Cu), 5m, AWG:26, 0?C ~ +70?C |
|
SFP-10GAC-7 |
SFP+ Direct Attach Active Cable(10GSFP+Cu), 7m, AWG:24, 0?C ~ +70?C |
|
SFP-10GAC-10 |
SFP+ Direct Attach Active Cable(10GSFP+Cu), 10m, AWG:24, 0?C ~ +70?C |
|
SFP-10GAC-12 |
SFP+ Direct Attach Active Cable(10GSFP+Cu), 12m, AWG:24, 0?C ~ +70?C |
Note: You can be customized diameter and distance.
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be
specifically confirmed in writing by F-tone before they become applicable to any particular order or
contract. In accordance with the F-tone policy of continuous improvement specifications may change
without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.