Description
The FT-MTRS-2E30-01 is a very compact 10Gb/s optical transceiver module for serial optical communication applications at 10Gb/s. The MTRS-2E30-01 series converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signalanda10Gb/sopticalinputsignalto10Gb/s serial electrical data streams.The high speed 10Gb/selectricalinterfaceisfullycompliantwith XFIspecification(builtinCDRonbothTXand RX) andallowsFR4 host PCB trace upto 200mm.The MTRS-2E30-01isdesignedforuseinavarietyof
10Gb/s equipment SDH/SONET (9.95Gb/s), EthernetLAN(10.3Gb/s)andFC(10.5Gb/s).The customercanadjustinterface’electricallevelto select 8.5G~11.3G rate section. The high performance 1310nm DFB transmitter coupled with a high sensitivity PIN receiver provide superiorperformanceforapplicationsupto10km with SMF. The fully compliant SFP form factor provideshighdensityapplications,hotplugabilityeasyoptical port upgradesand lowEMI emission.
TheSFP+LRw/CDRmodule electricalinterfaceis compliant to XFI electrical specifications. The transmitterinputandreceiveroutputimpedanceis
100Ohmsdifferential. Datalinesareinternally AC coupled. The module provides differential termination and reduce differential to common modeconversionforqualitysignalterminationand lowEMI. XFItypicallyoperatesover200mmof improvedFR4materialoruptoabout150mmof standard FR4with one connector.
Features
¡ñ 10Gb/s serial optical interface
¡ñ 1310nm DFB transmitter, PIN photo-detector
¡ñ Transmission distance up to 10Km with SMF
¡ñ LC duplex conector
¡ñ Integrated clock and data recovery (CDR) function
¡ñ Operating casetemperature:0°C~70°C
Applications
¡ñ SONET(OC-192)/SDH(STM64)
¡ñ 10GBASE-LR (10.3125Gbps)
¡ñ 10GBASE-LW (9.953Gbps)
Compliance
¡ñ CompliantwithIEEE 802.3ae-200210G Base-LR
¡ñ CompliantwithSFF-8431 & SFF-8083 & SFF-8432 & SFF-8472
¡ñ Compliant with RoHS
Specification
Table1-AbsoluteMaximumRatings |
|||||
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
Storage Temperature |
Ts |
-40 |
- |
+85 |
¡æ |
Operating CaseTemperature |
Tc |
0 |
- |
+70 |
¡æ |
SupplyVoltage |
Vcc |
0 |
- |
3.6 |
V |
Relative Humidity |
RH |
5 |
- |
+95 |
% |
Rx Input Average Power |
Pmax |
- |
- |
+3 |
dBm |
Table2-RecommendedOperatingConditions |
|||||
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
Operating Case Temperature |
TC |
0 |
25 |
+70 |
¡æ |
Power Supply Voltage |
VCC3 |
3.14 |
3.3 |
3.46 |
V |
Power Supply Current |
ICC3 |
- |
- |
430 |
mA |
Power Consumption |
|
- |
- |
1500 |
mW |
Table3-TransmitterOperatingCharacteristic-Optical,Electrical |
||||||
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
Note |
Operating DataRate |
DR |
8.5 |
9.953 |
11.3 |
Gb/s |
1 |
Output CenterWavelength |
λ c |
1290 |
1310 |
1330 |
nm |
|
Spectral Width |
¨Sλ |
- |
- |
1 |
nm |
|
Side Mode Suppression Ratio |
SMSR |
30 |
- |
- |
dB |
|
Average Output Power |
Po |
-6 |
- |
-1 |
dBm |
2 |
Disabled Power |
Poff |
- |
- |
-30 |
dBm |
2 |
Extinction Ratio |
ER |
6 |
- |
- |
dB |
2 |
Minimum OMA-TDP (10G Ethernet) |
OMAtdp |
-5.2 |
- |
- |
dBm |
3 |
Eye Mask (@SONET/SDH) |
GR-253-CORE/ITU-T G.691 |
|
2 |
|||
Eye Mask (@10G Ethernet) |
IEEE802.3ae |
|
3 |
|||
Generation Jitter 1 (20kHz - 80MHz) |
- |
- |
- |
0.3 |
UIp-p |
2,4 |
Generation Jitter 2 (4MHz - 80MHz) |
- |
- |
- |
0.1 |
UIp-p |
2,4 |
Relative Intensity Noise |
RIN |
- |
- |
-128 |
dB/Hz |
|
Chromatic Dispersion (SONET/SDH) |
CD |
- |
- |
6.6 |
ps/nm |
|
Operating Distance |
- |
- |
- |
10 |
km |
|
Attenuation (SONET/SDH) |
- |
0 |
- |
4 |
dB |
|
Channel Insertion Loss (10G Ethernet) |
- |
0 |
- |
6 |
dB |
|
Maximum DGD (SONET/SDH) |
DGD |
- |
- |
30 |
ps |
|
Single Ended Output Voltage Tolerance |
- |
-0.3 |
- |
4 |
V |
|
Common mode voltage tolerance |
- |
15 |
- |
- |
mV |
|
TxInput Diff Voltage |
VI |
120 |
- |
820 |
mV |
|
TxFault |
Vol |
-0.3 |
- |
0.4 |
V |
At 0.7mA |
Data Dependent Input Jitter |
DDJ |
- |
- |
0.1 |
UI |
|
Data InputTotalJitter |
TJ |
- |
- |
0.28 |
UI |
|
Table4-ReceiverOperatingCharacteristic-Optical,Electrical |
||||||
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
Note |
Operating Data Rate |
- |
8.5 |
9.953 |
11.3 |
Gb/s |
1 |
Input Center Wavelength |
lrc |
1260 |
|
1620 |
nm |
|
Overload |
Rovl |
0.5 |
- |
- |
dBm |
|
Minimum Sensitivity |
Rsen |
- |
- |
-14.4 |
dBm |
2 |
Sensitivity in OMA |
OMA0 |
- |
- |
-12.6 |
dBm |
3 |
Stressed Sensitivity in OMA |
OMAst |
- |
- |
-10.3 |
dBm |
3 |
RX_LOS Assert |
RLOSa |
-30 |
- |
- |
dBm |
|
RX_LOS Deassert |
RLOSd |
- |
- |
-16 |
dBm |
|
RX_LOS Hysteresis |
RLOSh |
0.5 |
- |
5 |
dB |
|
Optical Path Penalty |
DP |
- |
- |
1 |
dB |
1 |
Optical Return Loss |
ORL |
|
- |
-14 |
dB |
|
Jitter Tolerance |
GR-253-CORE/ITU-T G.783 |
|
|
|||
Single Ended Output Voltage Tolerance |
- |
-0.3 |
- |
4 |
V |
|
Rx Output Diff Voltage |
Vo |
340 |
- |
850 |
mV |
|
Data output rise/fall time |
|
30 |
|
|
ps |
20%~80% |
Total Jitter |
TJ |
- |
- |
0.7 |
UI |
|
Deterministic Jitter |
DJ |
- |
- |
0.42 |
UI |
|
Notes:
[1]Data rate tolerance 10GBASE-LR/LW: typ.+/-100ppm
[2]Measuredat9.953Gbps,Non-framed PRBS2^31-1,NRZ
[3]Measured byusing SFP+evaluationboard.
Table5-ControlandStatusI/O TimingCharacteristics |
||||||
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
Note |
TX Disable Assert Time |
t_off |
|
- |
10 |
µs |
1 |
TX Disable Negate Time |
t_on |
|
- |
1 |
ms |
2 |
Time to initialize including reset of TX_Fault |
t_init |
|
- |
300 |
ms |
3 |
TX Fault Assert Time |
t_fault |
|
- |
100 |
µs |
4 |
TX Disable to Reset |
t_reset |
10 |
- |
|
µs |
5 |
LOS Assert Time |
t_loss_on |
|
- |
100 |
µs |
6 |
LOS Deassert Time |
t_loss_off |
|
- |
100 |
µs |
7 |
Rate-Select Change Time |
t_ratesel |
|
- |
10 |
µs |
8 |
Serial ID Clock Rate |
f_serial_clock |
|
- |
100 |
kHz |
|
Notes:
[1]Time from rising edge ofTXDisable towhen theopticaloutput fallsbelow10% of nominal
[2]Time from falling edge ofTXDisable towhenthemodulatedoptical outputrisesabove90% ofnominal
[3] From poweron or negationofTXFault usingTXDisable
[4]Time fromfault toTXfault on
[5]TimeTXDisable mustbe held high to resetTX_fault
[6]Time fromLOSstatetoRXLOSassert
[7]Time fromnon-LOS state toRXLOSdeassert.
[8]TimefromrisingorfallingedgeofRateSelectinputuntilreceiverbandwidthisinconformancewithappropriate specification
DigitalDiagnosticFunction
ThefollowingdigitaldiagnosticcharacteristicsaredefinedovertheRecommendedOperatingEnvironmentunless otherwisespecified.ItiscomplianttoSFF-8472Rev11.1withinternalcalibrationmode.Forexternalcalibrationmode
please contactour salesstuff.
Table6:Digitaldiagnosticspecificationtable
Parameter |
Symbol |
Min. |
Max |
Unit |
Notes |
Temperature monitor absolute error |
DMI_Temp |
-3 |
3 |
degC |
|
Laser power monitor absolute error |
DMI_TX |
-3 |
3 |
dB |
|
RXpowermonitorabsolute error |
DMI_RX |
-3 |
3 |
dB |
|
Supplyvoltagemonitor absolute error |
DMI_VCC |
-3% |
-3% |
V |
|
Bias current monitor |
DMI_Ibias |
-10% |
10% |
mA |
|
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.