标准光� ？�
10Gb/s SFP+ CWDM 40km Optical Transceiver Module
Description
10Gb/s SFP+ CWDM 40km Optical Transceiver Module
Description
FTCS-Cxx1X(1470~1610)-DZxx SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 40km over single mode fiber. The module consists of CWDM EML Laser, 850nm VCSEL and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
FTCS-Cxx1X(1470~1610)-DZxx transceivers provide a unique enhanced digital diagnostic monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, and received optical power and transceiver supply voltage. It also defines a sophisticated system of alarm and warning flags, which alerts end-users when particular operating parameters are outside of a factory set normal range.
The SFP+ MSA defines a 256-byte memory map in EEPROM that is accessible over a 2-wire serial interface at the 8 bit address 1010000X (A0h). The digital diagnostic monitoring interface makes use of the 8 bit address 1010001X (A2h), so the originally defined serial ID memory map remains unchanged.
Features
● Up to 11.3Gb/s data links
● CWDM EML transmitter and VCSEL receiver
● Up to 40km on 9/125µm SMF
● Hot-pluggable SFP+ footprint
● Duplex LC/UPC type pluggable optical interface
● RoHS-10 compliant and lead-free
● Support Digital Diagnostic Monitoring interface
● Single +3.3V power supply
● Compliant with SFF+MSA and SFF-8472
● Metal enclosure, for lower EMI
● Meet ESD requirements, resist 8KV direct contact voltage
● Case operating temperature
Industrial: -40 ~ +85℃
Applications
● 10GBASE-LR/LW & 10G Ethernet
● SDH STM64
● Other Optical Links
Mechanical Specifications (Unit: mm)
Part Number Ordering Information
|
Part Number |
Data Rate (Gb/s) |
Wavelength (nm) |
Transmission Distance(km) |
Temperature (℃) (Operating Case) |
|
FTCS-Cxx1X(1470~1610)-DZxxI |
10.3125 |
Refer to wavelength selection |
40km SMF |
-40~85 Industrial |
Wavelength Selection: CWDM λ Wavelength Guide Pin Descriptions
|
Wavelength |
xx |
Clasp Color Code |
Wavelength |
xx |
Clasp Color Code |
|
1470 nm |
47 |
Gray |
1550 nm |
55 |
Yellow |
|
1490 nm |
49 |
Purple |
1570 nm |
57 |
Orange |
|
1510 nm |
51 |
Blue |
1590 nm |
59 |
Red |
|
1530 nm |
53 |
Green |
1610 nm |
61 |
Brown |
备注：LOS脚是OMA LOS模式，有信号加载的时候低电压，有光无信号加载或者无光的时候高电压。
注：本产品有全国产化型号可选
本产品为SFP CWDM系列光� ？�，如有需要，请联系大宝娱乐。
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
全国产化光� ？�
2.5Gbps单模 MiniSFF单纤双向光收发一体� ？�
纯国产零部件工业级事情温度，SFP,SFF, MINISFF, 1 X9封装可选，切合RoHS，收发一体、单发、单收、双发双收等多种模式可选，+3.3V单电源
DWDM中长距光� ？�
DWDM中长距光� ？�
速率可达10Gb/s，MINISFF、SFP+封装可选| 工业级温度规模，切合RoHS，DWDM 100G ITU GRID C波段波长可选，+3.3V单电源
10.3Gb/s SFP+ Transceiver,850nm
10.3Gb/s SFP+ Transceiver,850nm
F-tone Networks's FTCP-851X-02D Small Form Factor Pluggable (SFP+) transceivers are compatible with SFF-8431,SFF-8432 and support 10G Ethernet SR and 10G Fibre Channel .It is designed for use in 10G-Gigabit multi-rate links up to 300m of OM3 . Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
10Gb/s SFP+ 850nm Optical Transceiver Module
10Gb/s SFP+ 850nm Optical Transceiver Module
Description
FTCS-C85xx1X-DZxx SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 300m over Multi-mode fiber. The module consists of 850nm VCSEL Laser, 1310nm PIN and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
10Gb/s SFP+ CWDM 10km Optical Transceiver Module
10Gb/s SFP+ CWDM 10km Optical Transceiver Module
Description
FTCS-Cxx1X-DZ01I SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 10km over single mode fiber. The module consists of CWDM DFB Laser, 850nm VCSEL and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
10Gb/s SFP+ CWDM 10km 光� ？椋�1270~1450）
10Gb/s SFP+ CWDM 10km 光� ？�
Description
FTCS-Cxx1X(1270~1450)-DZxx SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 10km over single mode fiber. The module consists of CWDM DFB Laser, 850nm VCSEL and Preamplifier in a high-integrated optical sub-assembly.