±ê×¼¹âÄ£¿é
10Gb/s SFP+ CWDM 10km ¹âÄ£¿é£¨²¨³¤¿ÉÑ ¡£©
Description
10Gb/s SFP+ CWDM 10km ¹âÄ£¿é
Description
F-tone Networks’FTCS-Cxx1X-10Dxx SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 10km over single mode fiber. The module consists of CWDM DFB Laser, PIN and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
FTCS-Cxx1X-10Dxx transceivers provide a unique enhanced digital diagnostic monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, and received optical power and transceiver supply voltage. It also defines a sophisticated system of alarm and warning flags, which alerts end-users when particular operating parameters are outside of a factory set normal range.
The SFP+ MSA defines a 256-byte memory map in EEPROM that is accessible over a 2-wire serial interface at the 8 bit address 1010000X (A0h). The digital diagnostic monitoring interface makes use of the 8 bit address 1010001X (A2h), so the originally defined serial ID memory map remains unchanged.
Features
¡ñ Up to 11.3Gb/s data links
¡ñ CWDM DFB transmitter and PIN receiver
¡ñ Up to 10km on 9/125µm SMF
¡ñ Hot-pluggable SFP+ footprint
¡ñ Duplex LC/UPC type pluggable optical interface
¡ñ RoHS-10 compliant and lead-free
¡ñ Support Digital Diagnostic Monitoring interface
¡ñ Single +3.3V power supply
¡ñ Compliant with SFF+MSA and SFF-8472
¡ñ Metal enclosure, for lower EMI
¡ñ Meet ESD requirements, resist 8KV direct contact voltage
¡ñ Case operating temperature
Commercial: 0 ~+70¡æ
Applications
¡ñ 10GBASE-LR/LW & 10G Ethernet
¡ñ SDH STM64
¡ñ Other Optical Links
Mechanical Specifications (Unit: mm)
Part Number Ordering Information
|
Part Number |
Data Rate (Gb/s) |
Wavelength (nm) |
Transmission Distance(km) |
Temperature (¡æ) (Operating Case) |
|
FTCS-Cxx1X-10D |
10.3125 |
Refer to wavelength selection |
10km SMF |
0~70 commercial |
|
FTCS-Cxx1X-10DI |
10.3125 |
Refer to wavelength selection |
10km SMF |
-40~85 Industrial |
FTCS-Cxx1X-10Dxx Wavelength List:
|
Wavelength |
xx |
Clasp Color Code |
|
1470 |
H |
Gray |
|
1490 |
4 |
Purple |
|
1510 |
I |
Blue |
|
1530 |
J |
Green |
|
1550 |
5 |
Yellow |
|
1570 |
K |
Orange |
|
1590 |
L |
Red |
|
1610 |
M |
Brown |
×¢£º±¾²úÆ·ÓÐÈ«¹ú²ú»¯ÐͺſÉÑ¡
±¾²úƷΪSFP+ CWDMϵÁйâÄ£¿é£¬ÈçÓÐÐèÒª£¬ÇëÁªÏµ´ó±¦ÓéÀÖ ¡£
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
10Gb/s SFP+ 850nm Optical Transceiver Module
10Gb/s SFP+ 850nm Optical Transceiver Module
Description
FTCS-C85xx1X-DZxx SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 300m over Multi-mode fiber. The module consists of 850nm VCSEL Laser, 1310nm PIN and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
10Gb/s SFP+ CWDM 10km Optical Transceiver Module
10Gb/s SFP+ CWDM 10km Optical Transceiver Module
Description
FTCS-Cxx1X-DZ01I SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 10km over single mode fiber. The module consists of CWDM DFB Laser, 850nm VCSEL and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
10Gb/s SFP+ CWDM 10km ¹âÄ£¿é£¨1270~1450£©
10Gb/s SFP+ CWDM 10km ¹âÄ£¿é
Description
FTCS-Cxx1X(1270~1450)-DZxx SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 10km over single mode fiber. The module consists of CWDM DFB Laser, 850nm VCSEL and Preamplifier in a high-integrated optical sub-assembly.
10Gb/s SFP+ BIDI 100km Optical Transceiver Module
10Gb/s SFP+ BIDI 100km Optical Transceiver Module
Description
F-tone Networks’FTCS-B451X-H0Dxx/FTCS-B541X-H0Dxx SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 100km over single mode fiber. The module consists of EML Laser, APD and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
10Gb/s SFP+ CWDM 20km Optical Transceiver Module
10Gb/s SFP+ CWDM 20km Optical Transceiver Module
Description
FTCS-C351X-DZM-210726 SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 20km over single mode fiber. The module consists of CWDM DFB Laser, 850nm VCSEL and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
10Gb/s SFP+ CWDM 10km Optical Transceiver Module
10Gb/s SFP+ CWDM 10km Optical Transceiver Module
Description
FTCS-C371X-DZM-210726 SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 10km over single mode fiber. The module consists of CWDM DFB Laser, PIN and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.