The 1310nm 8mw-10mw DFB high power pigtailed laser modules have an excellent simulation performance due to the use of the DFB chip. This laser module features a power output range of 8 to 10 mw,which makes it ideal for use in CATC,digital,and analog signal transmission.
其它产品
1310nm 8mw-10mw DFB High Power Pigtailed Laser Modules
Description
Absolute Maximum Ratings
| Parameter | Symbol | Min. | Max. | Unit | Test Condition |
| Storage Temperature | Tstg | -40 | 100 | °C | - |
| Operating Temperature | Top | -40 | 85 | °C | - |
| Forward Current(LD) | If(LD) | 150 | mA | ||
| Reverse Voltage(LD) | Vr(PD) | 2 | V | ||
| Forward Current(PD) | If(LD) | 2 | mA | ||
| Reverse Voltage(PD) | Vr(PD) | 15 | V | ||
| Soldering Temp | - | - | 260 | °c | - S |
| Soldering Time | - | - | 10 | s |
Optical & Electrical Characteristics
| Parameter | Symbol | Min. | Tvp. | Max. | Unit | Test Condition |
| Rated Power | Po | 8 | 10 | mW | Ith+40mA | |
| Slope Efficiency | SE | 0.25 | 0.30 | mW/mA | ||
| Threshold Current | Ith | 10 | 15 | mA | - | |
| Operating Current | lop | 45 | 50 | mA | ||
| Forward Voltage Drop | Vop | - | 1.0 | 1.2 | V | CW，Ith+40mA |
| Cent Wavelength | λc | 1300 | 1310 | 1320 | nm | - |
| Spectrum Width(-3dB) | Δλ | - | 0.5 | 1 | nm | Ith+40mA |
| Side-mode Suppression Ratio | SMSR | 35 | - | dB | - | |
| Bandwidth | Bw | 2.5 | GHz | |||
| Monitor Current | Im | 100 | 1200 | uA | CW, Ith+40mA | |
| Dark Current of Monitor | Id | - | - | 100 | nA | 5V |
| Optical Isolation(Single stage) | ISO | 35 | 40 | - | dB | |
| Optical Isolation(Double stage) | ISO | 45 | 50 | - | dB | |
| Return loss | RL | -45 | dB | |||
| Analog Characteristic index | ||||||
| Relative Intensity Noise | RIN | - | -155 | -150 | dB/Hz | - |
| RF Bandpass Flatness | BF | ±1.5 | dB | |||
| Third-order Distortion | IMD3 | - | -55 | - | dBc | |
| Carrier Noise Ratio | CNR | 51 | - | - | dB | Note 1 |
| Composite Second Order | CSO | - | - | -57 | dBc | |
| Composite Triple Beat | CTB | - | - | -65 | dBc | |
Note:
① If=Iop,Optical Modulation,Index=3.2%/channel (minimum),60 PAL-D unmodulated carries (47 to 550MHz),10km single mode fiber,-1dBm received power,Receiver responsivity=0.85A/W.
② If=Iop,Optical Modulation, Index=3.2%/channel (minimum), CNR, CSO,CTB tested value at worst case over all test frequencies. NTSC 120ch,10km single mode fiber,-1dBm received power,Receiver responsivity=0.85A/W
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
20mw-40mw 1550nm Pulse Laser Module
The 20mw-40mw 1550nm pulse laser module has a maximum output power of 60mw due to the use of a DFB chip. Its high performance makes it ideal for use in OTDR systems.
60mw1550nm Pulse Laser Module
The 60mw 1550nm pulse laser module has a maximum output power of 60mw due to the use of a DFB or FP chip.Its high performance makes it ideal for use in OTDR systems.
80mw1550nm Pulse Laser Module
The 80mw1550nm pulse laser module uses an internationally known brand name chip, and features a maximum output power of 100mw.It is widely used in OTDR systems.
1625nm Pulse Laser Modules for OTDR
F-tone Networks 1625nm pulse laser modules for OTDR are equipped with a high power FP chip with low threshold current and high-efficiency output.Capable of working with a high current,the pulsed laser module can operate in dual mode,pulse and direct current.The multi-mode fiber is optional.This laser diode is generally used in the communication and testing systems that use OTDR and Raman light reflection principles.
30MW 1650nm Pulses Laser Diode Module for OTDR
The maximum output power of the 30mw 1650nm pulse laser diode module for OTDR reaches 30~40mw, making it ideal for use in OTDR systems.
1310nm 1mw-4mw DFB Pigtail Laser Diodes
The 1310nm 1mw-4mw DFB Pigtail Laser Diodes have an excellent simulation performance due to the use of a DFB chip.The output power is controlled within 1 to 4 mw based on customer needs,which makes this laser module ideal for use in CATV,digital,and analog signal transmissions.