±ê×¼¹âÄ£¿é
2~52Mbps 1x9 TTL MM Transceiver
Specifications
- ²úÆ·ÐͺÅ: FTTR-1301-XXX(XXXX)
- ¼æÈÝÆ·ÅÆ: ȫϵÁÐ
- ·â×°ÀàÐÍ: 1x9
- ´«ÊäËÙÂÊ: 2~52Mbps 1x9 TTL MM Transceiver
- ´«Êä¾àÀë: 2km
- ·¢É䲨³¤: 2~52Mbps 1x9 TTL MM Transceiver
- ÎüÊÕ²¨³¤: 2~52Mbps 1x9 TTL MM Transceiver
- ÊÂÇéζÈ: ÉÌÒµ¼¶0¡æ¡«+70¡æ/¹¤Òµ¼¶-40¡æ¡«+85¡æ ¿ÉÑ¡
- Êý×ÖÕï¶Ï: ²»´øDDM
- ÎüÊÕѸËÙ¶È: 2~52Mbps 1x9 TTL MM Transceiver
- ÎüÊÕѸËÙ¶È: 2~52Mbps 1x9 TTL MM Transceiver
Description
F-tone¡¯sFLTR-8502H-05X series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules support data rates up 2 to 52 Mbps. These modules are fully compliant with the Multi-sourced 1¡Á9 protocol.The transceiver modules suppliesthe TTL interface of 5.0 Voltage and provide the system designer with products to implement arange of low-speed data and digital video transmission designs at the 2 to 52 Mbps rate for fiber communications.Commerce level transceiver module which operating at 0¡æ to 70¡æ.
Product Features
- Multi-sourced 1 x 9 pin packaged
- 850nm VCSEL Laser Transmitter
- ST/SC/FCreceptacle
- Up to 0.5Km with 62.5/125¦Ìm MMF
- Single 5V power supply
- TTL signal input and output
- TTL logic level signal detect output
- Wave Solderable and washable with process plug inserted
- Two temperature ranges:
¡ª 0¡ãC to +70¡ãC
¡ª -40¡ãC to +85¡ãC for industry level
Application
- Fiber System
- Digital Video
Absolute Maximum Ratings
Operating of the transceiver beyond the Absolute Conditions Listed in Table 1 will degrade or damage the product. It¡¯s not implied that the product would function above the recommended operating environment, it¡¯s possible to reduce the reliability and lifetime of device if Recommended Operating Environment is exceeded (Refer to table 2)
Table 1-- Absolute Maximum Conditions
|
Parameter |
Symbol |
Min |
Max |
Units |
|
Storage Temperature |
TST |
-40 |
+85 |
¡æ |
|
Operating Temperature |
TOP |
0 |
+70 |
¡æ |
|
Supply Voltage |
VCC |
0 |
+6 |
V |
|
Relative Humidity |
RH |
5 |
95 |
% |
|
Lead Soldering Temperature & Time |
- |
- |
260/10 |
¡æ/S |
Table 2-- Recommended Operating Environment
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Supply Voltage |
VCC |
4.75 |
5.0 |
5.25 |
V |
|
Ambient operating Temperature |
TOP |
0 |
- |
+70 |
¡æ |
|
Supply Current |
ITX+IRX |
- |
100 |
150 |
mA |
Optical Parameters
Table 3 FLTR-8502H-05X Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=0¡ãC to +70¡ãC, VCC =4.75V to 5.25V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
- |
52 |
Mb/s |
|
Output Center Wavelength |
¦ËC |
830 |
850 |
860 |
nm |
|
Output Spectral width (RMS) |
¦Ë |
- |
- |
0.85 |
nm |
|
Average Optical Output Power |
PO |
-15 |
-8 |
-5 |
dBm |
|
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Sensitivity |
PMIN |
- |
- |
-30 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
- |
-30 |
dBm |
|
Signal Detect -- Deasserted |
PD |
-42 |
- |
- |
dBm |
|
Signal Detect - Hysteresis |
PHYS |
1.0 |
- |
4.0 |
dB |
Electrical Parameters
Table 4 (Ambient Operating Temperature Ta=0¡ãC to +70¡ãC, VCC = 4.75V to 5.25V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Power Supply Current |
ICC |
- |
- |
50 |
mA |
|
Data Input Current - Low |
IIL |
-350 |
- |
- |
¦ÌA |
|
Data Input Current - High |
IIL |
- |
- |
350 |
¦ÌA |
|
Data Input Voltage - Low |
VIL |
- |
- |
0.7 |
V |
|
Data Input Voltage - High |
VIH |
2.0 |
- |
- |
V |
|
Receiver |
|||||
|
Power Supply Current |
ICC |
- |
- |
100 |
mA |
|
Data Output Voltage ¨C Low |
VOL |
- |
- |
0.7 |
V |
|
Data Output Voltage ¨C High |
VOH |
2.0 |
- |
- |
V |
|
Signal Detect Output Voltage-Low |
VOL |
- |
- |
0.7 |
V |
|
Signal Detect Output Voltage-High |
VOH |
2.0 |
- |
V |
|
Pin Assignment & Signal Definition
Table 5 Connector pin assignment
|
Pin # |
Pin Name |
Description |
|
1 |
Rx VEE |
Receiver Signal Ground |
|
2 |
RD+ |
Receiver Data Out |
|
3 |
N/C |
N/C |
|
4 |
SD |
Signal Detect |
|
5 |
Rx VCC |
Receiver Power Supply |
|
6 |
Tx VCC |
Transmitter Power Supply |
|
7 |
N/C |
N/C |
|
8 |
TD+ |
Transmitter Data In |
|
9 |
Tx VEE |
Transmitter Ground |
Order Information
Table 1: Order Information
|
FLTR-8502H-05 |
1X9,2 ~52 Mbps rate,850(VCSEL),0.5KM,SC, 0¡ãC to +70¡ãC |
|
FLTR-8502H-05I |
1X9,2 ~52 Mbps rate,850(VCSEL),0.5KM,SC, -40¡ãC to +85¡ãC |
|
FLTR-8502H-05F |
1X9,2 ~52 Mbps rate,850(VCSEL),0.5KM,FC, 0¡ãC to +70¡ãC |
|
FLTR-8502H-05FI |
1X9,2 ~52 Mbps rate,850(VCSEL),0.5KM,FC, -40¡ãC to +85¡ãC |
|
FLTR-8502H-05T |
1X9,2 ~52 Mbps rate,850(VCSEL),0.5KM,ST, 0¡ãC to +70¡ãC |
|
FLTR-8502H-05TI |
1X9,2 ~52 Mbps rate,850(VCSEL),0.5KM,ST, -40¡ãC to +85¡ãC |
Note: Specifications subject to change without notice.
Related Products
1x9 DC0~2Mbps¹âÄ£¿é
F-tone¡¯sFLTR-1X01H-XX series of transceiver modules are the perfect solution for Low-speed communication networks. The transceiver modules support data rates up to 500Kbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver modules supplies the TTL interface of 5.0 Voltage and provide the system designer with products to implement a range of low speed data and fiber MODEM designs at the DC~500Kbps rate for fiber communications.Commerce level transceiver module which operating at 0¡æ to 70¡æ and Industry level which operating extended temperature as -40¡æ to +85¡æ for available.
1x9 2~84Mbps 850nm ¶àÄ£¹âÄ£¿é
- 1x9 2~84Mbps¹âÄ£¿é
- Multi-sourced 1 x 9 pin packaged
- 850nm VCSEL Laser Transmitter
- ST/SC/FCreceptacle
- Up to 0.5Km with 62.5/125¦Ìm MMF
- Single 3.3V/5V power supply
- TTL signal input and output
- TTL logic level signal detect output
- Wave Solderable and washable with process plug inserted
- Two temperature ranges:
¡ª 0¡ãC to +70¡ãC
¡ª -40¡ãC to +85¡ãC for industry level
1x9 0~10Mbps¹âÄ£¿é
F-tone¡¯sFTLR-xx00(H)-XX 0~10M series of transceiver modules are the perfect solution for Low-speed communication networks.
The transceiver modules supplies the 5 or 3.3 Voltage ,The modules supplies the 5 or 3.3 Voltage , These modules Applied to RS232¡¢RS485 optical-electrical converter for industrial control and electric power control with data rates up to 10Mbps£¬These modules are fully compliant with the Multi-sourced 1¡Á9 protocol.
Commerce level transceiver module which operating case temperature range at 0¡æ to 70¡æ and industry level which operating case temperature at -40¡æ to +85¡æ for available.
1x9 0~10Mbps MM Transmitter Module
1x9 0~10Mbps MM Transmitter Module,F-tone¡¯sFLTX-M1300-02T series of receiver modules are the perfect solution for Low-speed communication networks.Thetransmitter modules support data rates up to 10Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transmitter modules supplies the 5 Voltage and provides the system designer with products to implement a range of low-speed data and fiber MODEM designs at the 0 to 10Mbps rate for fiber communications.
1x9 84Mbps MM Receiver Module
DC0~10M 1x9¶àÄ£µ¥ÊÕ¹âÄ£¿é£º1x 9 0~10Mbps MM Receiver Module.F-tone¡¯sFLRX-M1300-02X series of receiver modules are the perfect solution for Low-speed communication networks.The receiver modules support data rates up to 10Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The receiver modules supplies the 5 Voltage and provides the system designer with products to implement a range of low-speed data and fiber MODEM designs at the 0 to 10Mbps rate for fiber communications.
2~100Mbps 1x9µ¥Ä£¹âÄ£¿é
2~100Mbps 1x9µ¥Ä£¹âÄ£¿é:2~100Mbps 1 x 9 TTL Transceiver Module,F-tone¡¯sFLTR-1x02-xx series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules support data rates up 2 to 100 Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver modules suppliesthe TTL interface of 5.0 Voltage and provide the system designer with products to implement arange of low-speed data and digital video transmission designs at the 2 to 84 Mbps rate for fiber communications.Commerce level transceiver module which operating at 0¡æ to 70¡æ and Industry level which operating extended temperature as -40¡æ to +85¡æ for available.