The APD/avalanche photo diode (3G InGaAs pulse APD diode pins for OTDR) is a p-n junction photodetector made of silicon or germanium.By applying a reverse bias voltage to the p-n junction,the incident light photons will strike the electrons in order to push them through a junction,thus achieving photoelectric current flows.When the applied reverse voltage increases,an avalanche current flow will occur.The avalanche effect of the current carrier is then used to amplify the photoelectric signal in the detection system in order to improve detector sensitivity.
This photo diode series features a small dark current, low operating voltage, and high sensitivity.It can operate in the pulse output mode or DC output mode, and is often used in OTDR systems and detection equipment for Raman backscattering systems.
其它产品
3G InGaAs Pulse APD Diode Pins for OTDR
Description
Absolute Maximum Ratings
| Parameter | Symbol | Min. | Typ. | Max. | Unit |
| Forward Current | IF | 10 | mA | ||
| Reverse Current | IR | 0.5 | mA | ||
| Operating Temp. | TC | -40 | 85 | °C | |
| Storage Temperature | TSTG | -40 | 85 | °C | |
| Lead Soldering Temp. | TSOL | - | 260(10s) | °c | |
| Relative Humidity | RH | 0 | 85 | % |
Optical & Electrical Characteristics
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Notes |
| Reverse Breakdown Voltage | VBR | 40 | 45 | 55 | V | ID = 100 μA |
| Temperature Coefficient of Reverse Breakdown Voltage1 | δ | 0.2 | %/°C | |||
| Dark Current | ID | 5 | 25 | nA | VR = VBR*0.9 | |
| Multiplied Dark Current | IDM | 1 | 3 | nA | M = 2 to 10 | |
| Terminal Capacitance | Ct | 0.35 | pF | VR = VBR* 0.9, f = 1 MHz | ||
| Cut-off Frequency | fC | 2.5 | GHz | M = 10 | ||
| Quantum Efficiency | η | 76 | 90 | % | λ = 1310 nm, M = 1 | |
| 65 | 77 | λ = 1550 nm, M = 1 | ||||
| Responsivity | S | 0.85 | 0.90 | A/W | λ = 1310 nm, M = 1 | |
| 0.90 | 0.95 | λ = 1550 nm, M = 1 | ||||
| Excess Noise Factor | X | 0.7 | - | λ = 1310 nm, IPO = 1.0 μw, M = 10, f = 35 MHz, B = 1 MHz | ||
| F | 5 | λ = 1550 nm, IPO = 1.0 μw, M = 10, f = 35 MHz, B = 1 MHz | ||||
| Optical Return Loss | ORL | 30 | 40 | dB | SMF |
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
650nm Pigtailed Laser Diode Module
F Type pin Applicable Power 1-2mw
M Type pin Applicable Power 1-5mw
N Type pin Applicable Power 5-20 mw
The maximum output power of the 650nm pigtailed laser diode module can reach 20 mw, which is widely used in light sources and instruments.Different types of fibers and connectors can be customized based on customers' needs.
635nm Pigtailed Laser Diode Module
F-tone Networks can offer different 635nm pigtailed laser diode modules with built-in InGaAs monitor photodiode,which can be used in light source detection or instruments.
850nm Pigtailed Laser Diode Components
F-tone Networks can offer 850nm laser diode components with different output power,which are generally used in light source detection or instruments.We provide coaxial pigtail packages or receptacle packages according to customer needs.
980nm Pigtailed Laser Diode Components
F-tone Networks can offer 980nm pigtailed laser diode components with different output power,which are generally used in light source detection or instruments.We provide coaxial pigtail packages or receptacle packages according to customer needs.
2.5G 1625nm DFB Pigtail Diode Laser
The 2.5G 1625nm DFB pigtail diode laser 1mw includes a CWDM-DFB laser chip,built-in isolator,built-in monitor photodiode,4-pin coaxial package, and optional SC,FC,ST,or LC optical fiber connector.It delivers a low threshold and operating current at a output power range between 1MW and 2MW. The length of optical fibers can be supplied according to the customer requirements.Various pin definitions are also available.This series of product can be used as the stabilized light source or modulated light source.It also finds applications in testing apparatus and OTDR equipment.
3G-10G 1100nm-1650nm InGaAs Coaxial Pigtail Pin Photo Diode
The 3-10g 1100nm-1650nm INGaAS coaxial pigtail pin photo diode employs a small,coaxial package and InGaAs detector chip.It features a very low power consumption,a small dark current,low return loss, good flexibility,great linearity, compact design,small volume,high reliability,and long service life.This product series is most often used in CATV receivers,in optical signal receivers in analog systems,and power detectors.