标准光�？�
40GBASE QSFP SR4 (FTCQ-4X-SR4I)
Description
Description
The FTCQ-4X-SR4I is a Four-Channels, Pluggable, Parallel, Fiber-Optic QSFP form factor for 40 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. It integrates four data lanes in each direction with 4x10.3125Gbps bandwidth. Each lane can operates at 10.3125Gbps up to 100 m using OM3 fiber or 150 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The optical interface uses a 12 fiber MTP (MPO) connector. This module incorporates F-tone Networks Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Features
● 4 channels full-duplex transceiver modules
● Transmission data rate up to 10.5Gbps per channel
● Compliant with QSFP MSA
● 4 channels 850nm VCSEL array
● 4 channels PIN photo detector array
● Low power consumption <1.5W
● Hot Pluggable QSFP form factor
● Maximum link length of 100m on OM3 Multimode Fiber (MMF) and 150m on OM4 MMF
● MPO12 connector receptacle
● Built-in digital diagnostic functions
● Operating case temperature -40°C to +85°C
● 3.3V power supply voltage
● RoHS compliant(lead free)
Applications
● IEEE 802.3ba 40G Ethernet
● Infiniband transmission at 4ch SDR, DDR and QDR
Mechanical Dimensions
Ordering Information
|
Part Number |
Product Description |
|
FTCQ-4X-SR4I |
QSFP 40GBASE-SR4, 100m on OM3 (MMF) and 150m on OM4 MMF; Operating case temperature -40°C to +85°C. |
本产品为25G~400G高速光�？橄盗�，如有需要，请联系大宝娱乐。
注：本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
40G QSFP+ ER4 40km Optical Transceiver (FTCQ-4X-ER4xx)
40G QSFP+ ER4 40km Optical Transceiver (FTCQ-4X-ER4xx)
Description
F-tone Networks’s 40GE QSFP+ ER4 40km Optical Transceiver modules are designed for using in 40 Gigabit Ethernet and 4X10G OTN client interfaces over single mode fiber. They are compliant with the QSFP+ MSA, IEEE 802.3bm 40GBASE-ER4, and OTU3 requirements.
40GBASE-LR4 10kM QSFP+ Optical Receiver (FTCQ-4X-LR4Rxx)
40GBASE-LR4 10kM QSFP+ Optical Receiver (FTCQ-4X-LR4Rxx)
Description
The FTCQ-4X-LR4Rxx is a 4x10G hot pluggable optical receiver. F-tone Networks technology enables an optical DeMUX with AAWG that delivers a 40Gbps data link in a compact QSFP footprint. The optical connectivity is based on SMF LC connectors. The Rx consists of 4 10Gbps CWDM channels, whose wavelengths are in the 1300nm range.
40G QSFP+ LR4 10km, Pull-Tab (FTCQ-4X-LR4xx)
40G QSFP+ LR4 10km, Pull-Tab (FTCQ-4X-LR4xx)
Description
The FTCQ-4X-LR4xx is a 4x10G hot pluggable optical transceiver. The F-tone Networks technology enables the integration of 4 transmitters, 4 receivers and an optical MUX/DeMUX with AAWG into a small form factor package that delivers a 40 Gbps data link in a compact QSFP footprint.
40Gb/s QSFP+ Parallel Single Mode Module 2km (FTCQ-4X-PSMIR4xx)
40Gb/s QSFP+ Parallel Single Mode Module 2km (FTCQ-4X-PSMIR4xx)
Description
QSFP PSM IR4 are a high performance, low power consumption, long reach interconnect solution supporting 40G Ethernet, fiber channel and PCIe. It is compliant with the QSFP MSA and 40GbE PSM4. QSFP PSM IR4 is an assembly of 4 full-duplex lanes, where each lane is capable of transmitting data at rates up to 10Gb/s, providing an aggregated rate of 40Gb/s.
4x10GBASE-LR/W QSFP+ Parallel Single Mode（PSM）Module 10km
4x10GBASE-LR/W QSFP+ Parallel Single Mode（PSM）Module 10km
Description
QSFP PSM LR4 are a high performance, low power consumption, long reach interconnect solution supporting 40G Ethernet, fiber channel and PCIe. It is compliant with the QSFP MSA and IEEE 802.3ae 10GBASE-LR/LW3. QSFP PSM LR4 is an assembly of 4 full-duplex lanes, where each lane is capable of transmitting data at rates up to 10.3125Gb/s, providing an aggregated rate of 40Gb/s.
QSFP+ SR4 (FTCQ-4X-SR4)
QSFP+ SR4 (FTCQ-4X-SR4)
Description
The F-tone Networks Technologies FTCQ-4X-SR4 is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications.