兼容光�？�
AFBR-59M5LZ
Description
AFBR-59M5LZ
Avago’s AFBR-59M5LZ optical transceiver supports high-speed serial links over multimode optical fiber at signaling rates up to 2.125 GBd. Compliant with the Small Form Factor (SFF) Multi Source Agreement (MSA) 2x5/2x10 mechanical specifications for LC Duplex transceivers, ANSI Fibre Channel FC-PI and IEEE 802.3 for gigabit applications the part is electrically interoperable with 2x5 and 2x6 conformant devices. The AFBR-59M5LZ is dimensionally compliant with the SFF MSA form factor with the exception of two additional pins for communicating with the diagnostic interface.
特征描述：
- 完全切合 RoHS 要求
- 诊断特点依照 SFF-8472“用于光纤收发器的诊断监测接口”
- 实时监测：
- 发射光纤的功率
- 接收光纤的功率
- 激光偏压电流
- 温度
- 供电电压
- 运作的宽温度规模 (-10°C 至 70°C) 和供电电压 (3.3V ±10%)
- 收发器规格依照 SFF 2x5 多源协议和 SFF-8472（修订版 9.3）
- 2.125 GBd 光纤通道操作依照 FC-PI 200-M5-SN-1 和 200-M6-SN-I 规格
- 1.25GBd 操作依照 IEEE 802.3 千兆以太网 1000Base-SX 规格
- 1.0625 GBd 光纤通道操作依照 FC-PI 100-M5-SN-I 和 100-M6-SN-I 规格
- 2.125 Gbd 下的链路长度：
- 300 米 (50µm MMF)
- 150 米 (65.5µm MMF)
- 1.25 Gbd 下的链路长度：
- 2 至 550 米 (50µm MMF)
- 2 至 275 米 (65.5µm MMF)
- 1.0625 GBd 下的链路长度：
- 500 米 (50μm MMF)
- 300 米 (62.5μm MMF)
- LC 双工光纤连接器接口切合 ANSI TIA/EIA604-10 (FOCIS 10A) 要求
- 850nm 笔直腔面发射激光器 (VCSEL) 技术
- IEC 60825-1 Class 1/CDRH Class 1 激光护眼
规格：
| 产品类别： | LC |
|---|---|
| 光纤样式： | Multimode Glass |
| 最远距离(M)： | 550 |
| 标称光波长 (nm)： | 850 |
| 发射器： | VCSEL |
Related Products
AFBR-83EDxxZ
AFBR-83EDxxZ
The Avago AFBR-83EDxxZ is a pluggable 10-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 10Gbps proprietary interconnect and 100 Gigabit Ethernet (100GbE) applications.
The AFBR-83EDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
AFBR-83CDxxZ
AFBR-83CDxxZ
AFBR-79Q2EKZ
AFBR-8420EVK
AFBR-8420EVK
The Avago AFBR-8420EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago 100G CFP2 SR10 module. The evaluation kit supports the Avago AFBR-8420Z, a 10-channel pluggable, multi-mode parallel optic transceiver module for high-density 100G Ethernet and Optical Transport Network (OTN) applications.
SFP Extender Board
SFP Extender Board
The SFP extender board was designed to access SFP low speed control signals while a DUT SFP compliant to SFF-8074 is plugged into the target application system such as a network switch and router.