兼容光�？�
AFCT-5716EXBZ
Specifications
- 接收灵敏度: 40KM
- 接收灵敏度: 40KM
Description
AFCT-5716EXBZ
The SFP extender board was designed to access SFP low speed control signals while a DUT SFP compliant to SFF-8074 is plugged into the target application system such as a network switch and router. The TX & RX high speed signals are routed on the board with 50 ohm transmission lines to maintain signal integrity. The extender board is a useful tool for trouble shooting any problems associated with SFP’s running in systems. This provides test points and LED’s to monitor status of the low speed control signals of the module running in a system.
规格：
| 资料速率：10.3125 GBd | |
|---|---|
| 产品类别：MTPR/MPO | |
| 光纤样式：Multimode Glass | |
| 最远距离(M)：150 | |
| 标称光波长 (nm)：850 | |
| 发射器：VCSEL |
Related Products
AFBR-77D2SZ
AFBR-77D2SZ
AFBR-2CARxxZ
AFBR-2CARxxZ
The Avago AFBR-2CARxxZ Active Optical Cable (AOC) is part of a family of SFP+ products to serve 10Gb Ethernet (10GbE) applications. The letters “xx” of the part number AFBR-2CARxxZ denote the cable length in meters. The AFBR-2CARxxZ enables 10GbE equipment designs with very high port density based on the electrical and mechanical specification enhancements to the well known SFP specifications developed by the SFF committee. The specifications are referred to as “SFP+” to represent the enhancements over previous SFP specifications. The SFP+ AOCs have a cable length up to 20m. These AOCs can be used as an alternative solution to SFP+ passive and active copper cables, while providing improved signal integrity, longer reach, superior electromagnetic immunity and better bit error rate performance
AFBR-83EDxxZ
AFBR-83EDxxZ
The Avago AFBR-83EDxxZ is a pluggable 10-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 10Gbps proprietary interconnect and 100 Gigabit Ethernet (100GbE) applications.
The AFBR-83EDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
AFBR-83CDxxZ
AFBR-83CDxxZ
AFBR-83EVK
AFBR-83EVK
The Avago AFBR-83EVK evaluation kit is designed to provide designers with a convenient means of evaluating the electrical and optical performance of Avago CXP and CXP AOC fiber optic transceiver modules.