高速线缆
MTP? Brand Connectors
Description
MTP? Brand Connectors
Features
- Patented floating ferrule design ensures fiber contact integrity
- Terminates ribbon fiber or loose individual fibers
- Designed for low loss and standard loss SM and MM applications
- Patented elliptical guide pin tip to minimize ferrule debris
- Ruggedized round cable, oval cable and bare ribbon options available
- Compatible with US Conec MT ferrules in fiber counts 4 - 24
- Color coded housings available to differentiate fiber type, polish type and/or connector grade
- Housing is removable for quick change of pin clamps and easy ferrule cleaning / re-polishing
- Alignment achieved with high precision guide pins
- No-epoxy housing design
- Family of bulkhead adapters available
- Keyed/Colored for security or Network Segregating available
Applications & Associated Standards
- Array trunk cables
- Array fiber to single fiber fanouts and cassettes
- High fiber density card edge access
- Optical switching interframe connections
- Meets IEC Standard 61754-7
- Meets TIA/EIA 604-5 Type MPO
- Structured cabling per TIA-568-C
- Parallel Optics
- Optical Internetworking Forum (OIF) Compliant
- Infiniband Compliant
- 10G Fiber Channel Compliant
- 40G and 100G IEEE 802.3
- SNAP 12
- POP 4
- QSFP
Specifications
|
MM MT Elite? |
Standard
Multimode MT Ferrule |
SM MT Elite? |
Standard
Single-mode MT Ferrule |
|
| Insertion Loss |
0.1dB Typical (All Fibers) |
0.20dB Typical (All Fibers)
0.60dB Maximum (Single Fiber)2,3,5 |
0.10dB Typical (All Fibers) |
0.25dB Typical (All Fibers)
0.75dB Maximum (Single Fiber)1,5 |
| Optical Return Loss |
> 20dB
5 |
> 20dB
5 |
> 60dB (8° Angle Polish)
5 |
> 60dB (8° Angle Polish)
5 |
1 As tested per ANSI/EIA-455-171 Method D3
2 As tested per ANSI/EIA-455-171 Method D1
3 As tested with proposed encircled flux launch condition on 50um fiber and 850nm per IEC 61280-4-1
4 Compliant with proposed IEC 61755-3-31/GRADE B
5 For 48-fiber MM MTs, 72-fiber MM MTs, or 24-fiber SM MTs, please see our FAQs for more details.
Related Products
MPO/MTP主干光缆组件
F-tone公司专业研发制造MPO / MTP主干光缆组件包括MPO对MPO型号和MPO对普通连接头的混淆型 ，并可配套提供线轴包装、布线拉索环及即插使用型MPO�？楹泻筒灏蚊姘� ，满足客户对高密度布线连接的高效性和高性能需求 。
MPO/MTP多芯光缆跳线组件
MPO / MTP多芯光缆跳线组件产品是由多芯光缆和对应的4/8/12/24/48芯高密度MPO / MTP组成 。此产品可提供公头或母头的MPO / MTP型号 ，并且可选用种种规格的4~48芯单模和多模光缆 。
MPO/MTP有源光缆配线组件
MPO/MTP 有源光缆配线组件是应用在高速有源光缆中的 ，如QSFP/QDR/ CXP等光电�？� 。 利用MPO/MTP插芯或FA组合装配成小型高速互连的多芯光纤连接线 ，单�；蚨嗄５墓娓穸伎啥ㄗ� 。
POD（平行光学设备�？椋┑缋伦榧�
F-tone 的特薄12芯 POD（平行光学设备�？椋┑缋伦榧ㄒ喑� PRIZM* LightTurn? 电缆组件）设计用于与 Avago Technologies 的 120 Gbps MicroPOD? and MiniPOD? 平行光学�？榻胁迮� 。1.80 毫米带护套的、裸线带状电缆组件可与光学�？槎ゲ勘手辈迮� ，从而可为印刷电路板提供简单组件和优化气流 �？稍� F-tone 的高密度互连装置（包括 HBMT?、阵列和环形 MT 连接器）中使用多个 24、 48 和 72 芯 MT 套管将 MT 12 芯 VersaBeam 互连装置整合到位于面板前后端的简单 I/O 组件 。
MTP/MPO光纤配线箱
MTP/MPO光纤配线箱:高密度,高传输光纤配线箱配线系统全部接纳预连接的 方法 ，接口为MTP-LC 。1个MTP接口输入对应12芯LC接口输出 ，施工人员只需要进行简单的插入 就可以实现整个链路的通信 。整个历程只需要短短几十秒(包括理线、插跳线) 。本光纤配线箱最大支持96芯LC双联接口 ，接纳分组形式治理 ，差别分组对应不 同外被颜色的光缆 ，维护便当 ，提高施工治理效率 。
MTP? Bulkhead Adapters
- One piece adapter design maximizes coupling strength while minimizing debris generation
- All adapters compatible with MTP Elite? brand connectors and standard grade MTP? brand connectors
- Available in black, aqua, beige, green, blue and gray