SFP+ Transceiver 10GBase-ZR 10Gb/s CWDM, 80KM

Product Description
F-tone Networks's series optical transceiver is designed for fiber communications application up to 10G, which fully compliant with the specification of SFP+ MSA SFF-8431.This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are eight center wavelengths available from 1470nm to 1610nm, with each step 20nm. A guaranteed optical link budget of 23 dB is offered.The module is with the SFP+ connector to allow hot plug capability. Only single 3.3V power supply is needed. The optical output can be disabled by LVTTL logic high-level input of TX_DIS. Loss of signal (RX_LOS) output is provided to indicate the loss of an input optical signal of receiver.This module provides digital diagnostic functions via a 2-wire serial interface as defined by the SFF-8472 specification.

Features:
¡ñ Operating data rate up to 10.3Gbps
¡ñ 1550nm cooled EML Transmitter
¡ñ High sensitivity APD Receiver
¡ñ Distance up to 80km over SMF
¡ñ Single 3. 3V Power supply and TTL Logic Interface
¡ñ Duplex LC Connector Interface,Hot Pluggable
¡ñ Compliant with SFP+ MSA Specification SFF-8431
¡ñ Compliant with SFF-8472
¡ñ Operating Case Temperature Standard:0?C~+70?C

Applications:
¡ñ 10GBASE-ZR at 10.31Gbps
¡ñ 10GBASE-ZW at 9.95Gbps
¡ñ 1000 Base-LX Ethernet
¡ñ 8x FC at 8.5Gbps
¡ñ 4x FC at 4.25Gpbs
¡ñ 2x FC at 2.125Gpbs
¡ñ 1x FC at 1.0625Gbps
¡ñ Other optical links

Order Information:

Important Notice

Performance figures,data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.