
SFP Transceiver,SM1310nm,1.25G,20km
Product Description
F-tone Networks¡¯s FTCS-1312-20Dxx-GC Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector.The module data link up to 10KM in 9/125um single mode fiber.
The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.
Product Features
¡ñ Up to 1.25Gb/s data links
¡ñ 1310nm FP laser transmitter and PIN photo-detector
¡ñ Up to 20km on 9/125?m SMF
¡ñ Hot-pluggable SFP footprint
¡ñ Duplex LC/UPC type pluggable optical interface
¡ñ Low power dissipation
¡ñ Metal enclosure, for lower EMI
¡ñ RoHS compliant and lead-free
¡ñ Single +3.3V power supply
¡ñ Support Digital Diagnostic Monitoring interface
¡ñ Compliant with SFF-8472
¡ñ Meet ESD requirements, resist 8KV direct contact voltage
¡ñ Case operating temperature
¡ñ Commercial: 0¡ãC to +70¡ãC
Extended: -10¡ãC to +80¡ãC
Industrial: -40¡ãC to +85¡ãC
Applications
¡ñ Switch to Switch Interface
¡ñ Gigabit Ethernet
¡ñ 1xFiber channel Application
¡ñ Switched Backplane Applications
¡ñ Router/Server Interface
¡ñ Other Optical Links
Absolute Maximum Ratings
|
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
|
Storage Temperature |
Ts |
-40 |
85 |
?C |
||
|
Relative Humidity |
RH |
5 |
95 |
% |
||
|
Power Supply Voltage |
VCC |
-0.5 |
4 |
V |
||
|
Signal Input Voltage |
-0.3 |
Vcc+0.3 |
V |
|||
|
Receiver Damage Threshold |
+5 |
dBm |
Recommended Operating Conditions
|
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
|
Case Operating Temperature |
Tcase |
0 |
70 |
?C |
FTCS-1312-20D-GC |
|
|
-10 |
80 |
FTCS-1312-20DE-GC |
||||
|
-40 |
85 |
FTCS-1312-20DI-GC |
||||
|
Power Supply Voltage |
VCC |
3.13 |
3.3 |
3.47 |
V |
|
|
Power Supply Current |
ICC |
250 |
mA |
|||
|
Power Supply Noise Rejection |
100 |
mVp-p |
100Hz to 1MHz |
|||
|
Data Rate |
1250/1250 |
Mbps |
TX Rate/RX Rate |
|||
|
Transmission Distance |
20 |
KM |
||||
|
Coupled Fiber |
Single mode fiber |
9/125um SMF |
||||
Specification of Transmitter
|
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
|
Average Output Power |
POUT |
-9 |
-3 |
dBm |
Note (1) |
|
|
Extinction Ratio |
ER |
9 |
dB |
|||
|
Center Wavelength |
¦ËC |
1270 |
1310 |
1360 |
nm |
|
|
Side Mode Suppression Ratio |
SMSR |
- |
dB |
|||
|
Spectrum Bandwidth (RMS) |
¦Ò |
3.5 |
nm |
|||
|
Transmitter OFF Output Power |
POff |
-45 |
dBm |
|||
|
Output Eye Mask |
Compliant with IEEE802.3 z (class 1 laser safety) |
Note (2) |
||||
Notes:
1.Measure at 2^7-1 NRZ PRBS pattern
2.Transmitter eye mask definition
Specification of Receiver
|
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
|
Input Optical Wavelength |
¦ËIN |
1270 |
1610 |
nm |
PIN-TIA |
|
|
Receiver Sensitivity |
PIN |
-20 |
dBm |
Note (1) |
||
|
Input Saturation Power (Overload) |
PSAT |
-3 |
dBm |
|||
|
Los Of Signal Assert |
PA |
-36 |
dBm |
|||
|
Los Of Signal De-assert |
PD |
-21 |
dBm |
Note (2) |
||
|
LOS Hysteresis |
PA-PD |
0.5 |
2 |
6 |
dB |
Notes:
1.Measured with Light source 1310nm, ER=9dB; BER =<10^-12 @PRBS=2^7-1 NRZ
2.When LOS de-asserted, the RX data+/- output is High-level (fixed)
Electrical Interface Characteristics
|
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
|
Power Consumption |
P |
|
|
0.85 |
W |
|
|
Supply Current |
Icc |
|
|
250 |
mA |
|
|
Transmitter |
||||||
|
Single-ended Input Voltage Tolerance |
VCC |
-0.3 |
4.0 |
V |
||
|
Differential Input Voltage Swing |
Vin,pp |
200 |
2400 |
mVpp |
||
|
Differential Input Impedance |
Zin |
90 |
100 |
110 |
Ohm |
|
|
Transmit Disable Assert Time |
5 |
us |
||||
|
Transmit Disable Voltage |
Vdis |
Vcc-1.3 |
Vcc |
V |
||
|
Transmit Enable Voltage |
Ven |
Vee-0.3 |
0.8 |
V |
||
|
Receiver |
||||||
|
Differential Output Voltage Swing |
Vout,pp |
500 |
900 |
mVpp |
||
|
Differential Output Impedance |
Zout |
90 |
100 |
110 |
Ohm |
|
|
Data output rise/fall time |
Tr/Tf |
100 |
ps |
20% to 80% |
||
|
LOS Assert Voltage |
VlosH |
Vcc-1.3 |
Vcc |
V |
||
|
LOS De-assert Voltage |
VlosL |
Vee-0.3 |
0.8 |
V |
||
Mechanical Specifications (Unit: mm)

Part Number Ordering information
|
Product part Number |
Data Rate (Mbps) |
Media |
Wavelength(nm) |
Transmission Distance(km) |
Temperature Range£¨Tcase£©£¨¡æ£© |
|
|
FTCS-1312-20D-GC |
1250 |
Single mode fiber |
1310 |
20 |
0~70 |
commercial |
|
FTCS-1312-20DE-GC |
1250 |
Single mode fiber |
1310 |
20 |
-10~80 |
extended |
|
FTCS-1312-20DI-GC |
1250 |
Single mode fiber |
1310 |
20 |
-40~85 |
industrial |
×¢£º¡°GC¡±ÎªÌìϲú¡£
大宝娱乐 | F-tone Networks
ÆóÒµÓÊÏ䣺sales@f-tone.com
ÆóÒµÍøÕ¾£ºwww.f-tone.com
ÆóÒµÍøÕ¾£ºwww.sfpgmk.com
ÆóÒµµç»°£º028-85255257
ÆóÒµ´«Õ棺028-85977702
×¢£º±¾²úÆ·ÓÐÌìϲú»¯ÐͺſÉÑ¡
±¾²úƷΪ1.25G SFPϵÁйâÄ£¿é£¬½öչʾ²¿·Ö²ÎÊý£¬ÈôÓÐÐèÒª£¬ÇëÁªÏµ大宝娱乐¡£
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.