²úÆ·Ðͺţº(Â޽ܿµ¹âÄ£¿é:SFP1131-1FX50¹âÄ£¿éÌæ»»ÐͺÅFTCS-1303-50DI)
²úÆ·ÃèÊö£ºÂ޽ܿµSFP¹âÄ£¿é SFP1131-1FX50 IEEE 802.3ab for 100Base-FX¹âÏËÄ£¿é
¼æÈÝÆ·ÅÆ£ºRUGGEDCOM
Ô³§ÃèÊö£ºSiemens' RUGGEDCOM SFP1131-1FX50 industrial 50km FE SFP transceiver
? Compliant with SFP MSA and SFF 8074i for 100Base-FX
? Compliant with SFF-8472 Digital Diagnostic Monitoring Interface
? LC duplex fiber connector
? Bail latch
? Compliant with ITU-T G957 STM-1 L1.1 Optical Interface
? Compliant with Telcordia GR253 OC3 LR-1 Optical Interface
? Transmission distance up to 50 km (31.1 mi)
? Hot swappable
? RoHS compliant
Speed |
100 Mbps |
Mode |
SM (Single-Mode) |
Interface |
FX |
Connector |
LC |
Cable Type |
9/125 ¦Ìm |
Wavelength |
1300 nm |
Nominal Distance |
50 km (31.1 mi) |
Cabling
Transmit Power |
-5 to -0 dBm |
Receiver Sensitivity |
-34 to -0 dBm |
Power Budget |
29 |
Environment
Operating Temperature |
-40 to 85 ¡ãC (-40 to 185 ¡ãF) |
Operating Relative Humidity |
0 to 85% (non-condensing) |
Storage Temperature |
-40 to 85 ¡ãC (-40 to 185 ¡ãF) |
The RUGGEDCOM SFP1131-1FX50 complies with the following regulatory requirements when installed in Siemens RUGGEDCOM routers and/or switches:
Feature |
Standard |
Performance |
Electrostatic Discharge (ESD) to the Electrical Pins |
MIL-STD-883C, Method 3015.4 JEDEC/EIA JESD22-A114-A |
Class 2 (2000 V) |
Electrostatic Discharge (ESD) to the Duplex LC Receptacle |
Bellcore GR1089-CORE |
25 kV Air Discharge 10 Zaps at 8 kV (contact discharge) on the electrical faceplate on panel |
Electromagnetic Interference (EMI) |
FCC Class B |
Compliant |
Immunity |
Variation of IEC 61000-4-3 |
Compliant |
Eye Safety |
US FDA CDRH AEL Class 1 IEC/EN 60825-1 and 60825-2 EN 60950 Class 1 |
Class 1 |
RoHS |
EU RoHS Directive 2002/95/EC |
Compliant |
Article Number |
Name |
Description |
6GK6000-8FE53-0AA0 |
RUGGEDCOM SFP1131-1FX50 |
100Base-FX SFP ¨C SM, 1300 nm, LC, 50 km |
Performance figures, data and any illustrative material provided in this data sheet are typical and must bespecifically confirmed in writing by F-tone Networks before they become applicable to any particular order orcontract. In accordance with the F-tone Networks policy of continuous improvement specifications may changewithout notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.