其它产品
Unidirectional Integrated Tap Photodiode (UTPD)
Description
Unidirectional Integrated Tap Photodiode (UTPD)
The Unidirectional Integrated Tap Photodiode (UTPD) integrates the functionality of an optical coupler and a photodiode for optical network's power monitoring. The unidirectional feature allows the PD to respond power from input port only. It can be applied for channel power monitoring in DWDM system, optical fiber line auto switch protection equipment (OLP), re-configurable optical add/drop multiplexer (OADM), and gain/attenuation monitoring in EDFA, etc.
|
Specifications |
||
|
Parameter |
Unit |
Value |
|
Operating Wavelength Range (λop) |
nm |
1528 - 1567 |
|
Max. Insertion Loss 1% |
dB |
0.3 |
| 2% | dB |
0.4 |
| 5% | dB |
0.5 |
|
10% |
dB | 0.9 |
|
50% |
dB | 3.5 |
|
Max Wavelength Dependent Loss |
dB |
0.2 |
|
Max. Polarization Dependent Loss |
dB |
0.05 |
|
Min. Return Loss |
dB |
45 |
|
Responsivity 1% |
mA/W |
7 - 15 |
| 2% | mA/W |
14 - 25 |
| 5% | mA/W |
35 - 65 |
|
10% |
mA/W | 75-120 |
|
50% |
mA/W | 392-570 |
|
Min. Directivity From Output to PD** |
dB |
25 |
|
Max. Wavelength Dependent Responsivity*** |
dB |
+/-0.4 |
|
Max. Dark Current (@70 ℃, -5 V bias) |
nA | 2 |
|
Max. Optical Power 1% |
mW |
1000 |
|
2% |
mW | 500 |
|
5% |
mW | 200 |
|
10% |
mW | 100 |
|
50% |
mW | 20 |
|
Max. Power on PD Chip |
mW |
10 |
|
Max. Linearity Optical Power from -40dBm to +10 dBm on PD (-5V bias) |
% |
5 |
|
Fiber Type |
SMF-28 Ultra Fiber |
|
|
Operating Temperature |
℃ |
-5 to +75 |
| Storage Temperature | ℃ | -40 to+85 |
| Soldering Tempeature (Over 2mm from Head, Less than 5s) | ℃ | ≤ 260 |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
3/10W 1064nm PM Circulator, CW or Pulsed, 1.0 μm Fiber Laser
3/10W 1064nm PM Circulator, CW or Pulsed, 1.0 μm Fiber Laser
The High Power Polarization Maintaining Circulator is characterized with low insertion loss, high isolation, high power handling, high return loss, and high extinction ratio. It is ideal for fiber laser and instrumentation applications.
2W 1064nm Isolator, CW or Pulsed
2W 1064nm Isolator, CW or Pulsed
The 1064nm High Power Polarization Insensitive Isolator is characterized with low insertion loss, high isolation, high power handling, high return loss, excellent environmental stability and reliability. It is ideal for fiber laser and instrumentation applications.
1064nm Polarization Insensitive Optical Circulator
1064nm Polarization Insensitive Optical Circulator
The Optical Circulator is a compact, high performance lightwave component that routes incoming signals from Port 1 to Port 2, and incoming Port 2 signals to Port 3. The component provides high isolation, low insertion loss, low PDL, low PMD and excellent environmental stability.
Singlemode Dual Window Wavelength Flattened Coupler (SDC Series)
Singlemode Dual Window Wavelength Flattened Coupler (SDC Series)
The Singlemode Dual Window Wavelength Flattened Couplers offer very low insertion loss, low polarization dependence and excellent enviromental stability. Accurate coupling ratio from 50/50 to 1/99 are available with very good uniformity in a wide wavelength range of both 1310 nm and 1550 nm windows. These components find extensive applications to perform power splitting and mornitoring fuctions in all kinds of optical communication systems.
980/1550nm PMWDM
980/1550nm PMWDM
The Polarization Maintaining Fused Wavelength Division Multiplexer combine or separate light at different wavelengths. They offer very low insertion loss, high extinction ratio, and excellent environmental stability. These components can be operating on both fast and slow axes.
Isolator/Filter WDM Hybrid (1310/1550, 1480/1550)
Isolator/Filter WDM Hybrid (1310/1550, 1480/1550)
The 1310/1550, 1480/1550 IWDM series combines Filter WDM and isolator into a compact package to offer cost saving solution. This device is ideal to be used in 1310/1550 WDM network and line monitoring applications to combine two signal wavelengths and eliminate back reflection. This 1480/1550 device is ideal for fiber amplifier application to combine signal and pump wavelengths with very stable 1550 nm signal isolation. They are designed and manufactured according to Telcordia standard and capable of high power handling.