±ê×¼¹âÄ£¿é
3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module
Specifications
- ²úÆ·ÐͺÅ: FTTR-13XX-XXX(XXXX)
- ¼æÈÝÆ·ÅÆ: ȫϵÁÐ
- ·â×°ÀàÐÍ: 1x9
- ´«ÊäËÙÂÊ: 3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module
- ´«Êä¾àÀë: 0~160km¿ÉÑ¡
- ·¢É䲨³¤: 3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module
- ½ÓÊÕ²¨³¤: 3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module
- ÊÂÇéζÈ: ÉÌÒµ¼¶0¡æ¡«+70¡æ/¹¤Òµ¼¶-40¡æ¡«+85¡æ ¿ÉÑ¡
- Êý×ÖÕï¶Ï: ²»´øDDM
- ½ÓÊÕÁéÃô¶È: 3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module
- ½ÓÊÕÁéÃô¶È: 3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module
Description
HD 3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module
Product Description
F-tone¡¯s FTTR-1XU9-20/40X HD series of transceiver modules are the perfect solution for High-speed communication networks.The transceiver modules may use different data rates (or data level)between transmitter and receiver, support data rates up to 3 Gbps. These modules are fully compliant with the Multi-sourced 1¡Á9 protocol.The FTTR-1XU9-20/40Xseries is high performance module forsingle fiber communications by using 1310nm/1550nm transmitterand 1550nm/1310nm receiver. The transmitter section uses a DFB(or FP) laser diode and is a class1 lasercompliant according to International Safety StandardIEC-825. The receiver section uses an integrated 1310nmdetector preamplifier (IDP) mounted in an optical headerand a limiting post-amplifier IC. A LVPECL/CML logic interfacesimplifies interface to external circuitry.
Product Features
- SMPTE 297-2006 Compatible
- 1-Fiber Bi-Directional 1¡Á9 Optical Transceiver
- Speed from 155 Mbps to 3Gbps with up to 40 km Single-mode Fiber
- Support Video Pathological Patterns for SD-SDI,
- HD-SDI and 3G-SDI :1550 nm Transmitter ,1310 nm Receiver
- Simplex SC/FC/ST Connector
- Single +3.3 V Power Supply
- RoHS-6 Compliant
- 0 to 70oC Operation
- Class 1 Laser International Safety Standard IEC-60825 Compliant
Application
- SMPTE 297-2006 Compliant Electrical-to-Optical Interfaces
- High-density Video Routers
Absolute Maximum Ratings
Operating of the transceiver beyond the Absolute Conditions Listed in Table 1 will degrade or damage the product. It¡¯s not implied that the product would function above the recommended operating environment, it¡¯s possible to reduce the reliability and lifetime of device if Recommended Operating Environment is exceeded (Refer to table 2)
Table 1-- Absolute Maximum Conditions
|
Parameter |
Symbol |
Min |
Max |
Units |
|
|
Storage Temperature |
TST |
-40 |
+85 |
¡æ |
|
|
Operating Temperature |
Commerce level |
TOP |
0 |
+70 |
¡æ |
|
Supply Voltage |
VCC |
0 |
+3.6 |
V |
|
|
Output Current |
IO |
0 |
30 |
mA |
|
|
Relative Humidity |
RH |
5 |
95 |
% |
|
|
Input voltage |
VIN |
0 |
VCC |
V |
|
|
Lead Soldering Temperature & Time |
- |
- |
260/10 |
¡æ/S |
|
Table 2-- Recommended Operating Environment
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
|
Supply Voltage |
3.3V power |
VCC |
3.1 |
3.3 |
3.5 |
V |
|
Ambient operating Temperature |
Commerce level |
TOP |
0 |
- |
+70 |
¡æ |
|
Baud Rate |
- |
3.0 |
- |
Gbps |
||
|
- |
155 |
- |
Mbps |
|||
|
Supply Current |
ITX+IRX |
- |
200 |
280 |
mA |
|
Optical Parameters
Table 3 FTTR-13U9-20X Asymmetry Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=0¡ãC to +70¡ãC, VCC = 3.13 to 3.45V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
155 |
- |
Mb/s |
|
Output Center Wavelength |
¦Ëc |
1260 |
1310 |
1360 |
nm |
|
Output Spectral width (RMS) |
¦Ë |
- |
- |
3.0 |
nm |
|
Average Optical Output Power |
Po |
-14 |
-9 |
-5 |
dBm |
|
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Data rate |
B |
- |
3.0 |
- |
Gb/s |
|
Receiver Sensitivity |
PMIN |
- |
- |
-18 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
- |
-18 |
dBm |
|
Signal Detect -- Deasserted |
PD |
-30 |
- |
- |
dBm |
|
Signal Detect - Hysteresis |
PHYS |
0.5 |
- |
- |
dB |
Table 4FTTR-15U9-20X Asymmetry Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=0¡ãC to +70¡ãC, VCC = 3.1 to 3.5V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
3.0 |
- |
Gb/s |
|
Output Center Wavelength |
¦Ëc |
1480 |
1550 |
1580 |
nm |
|
Output Spectral width (-20dB) |
¦Ë |
- |
- |
1.0 |
nm |
|
Average Optical Output Power |
Po |
-5 |
-3 |
0 |
dBm |
|
Extinction Ratio |
EXT |
8.2 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Data rate |
B |
- |
155 |
- |
Mb/s |
|
Receiver Sensitivity |
PMIN |
- |
- |
-34 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
- |
-34 |
dBm |
|
Signal Detect -- Deasserted |
PD |
-45 |
- |
- |
dBm |
|
Signal Detect - Hysteresis |
PHYS |
0.5 |
- |
- |
dB |
Table 5 FTTR-13U9-40X Asymmetry Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=0¡ãC to +70¡ãC, VCC = 3.13 to 3.45V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
155 |
- |
Mb/s |
|
Output Center Wavelength |
¦Ëc |
1260 |
1310 |
1360 |
nm |
|
Output Spectral width (RMS) |
¦Ë |
- |
- |
3.0 |
nm |
|
Average Optical Output Power |
Po |
-10 |
-7 |
-3 |
dBm |
|
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Data rate |
B |
- |
3.0 |
- |
Gb/s |
|
Receiver Sensitivity |
PMIN |
- |
- |
-18 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
- |
-18 |
dBm |
|
Signal Detect -- Deasserted |
PD |
-30 |
- |
- |
dBm |
|
Signal Detect - Hysteresis |
PHYS |
0.5 |
- |
- |
dB |
Table 6FTTR-15U9-40X Asymmetry Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=0¡ãC to +70¡ãC, VCC = 3.1 to 3.5V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
3.0 |
- |
Gb/s |
|
Output Center Wavelength |
¦Ëc |
1480 |
1550 |
1580 |
nm |
|
Output Spectral width (-20dB) |
¦Ë |
- |
- |
1.0 |
nm |
|
Average Optical Output Power |
Po |
-3 |
0 |
+2 |
dBm |
|
Extinction Ratio |
EXT |
8.2 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Data rate |
B |
- |
155 |
- |
Mb/s |
|
Receiver Sensitivity |
PMIN |
- |
- |
-35 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
- |
-35 |
dBm |
|
Signal Detect -- Deasserted |
PD |
-45 |
- |
- |
dBm |
|
Signal Detect - Hysteresis |
PHYS |
0.5 |
- |
- |
dB |
Electrical Parameters
Table 7 (Ambient Operating Temperature Ta=0¡ãC to +70¡ãC, VCC = 3.1 to 3.5V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Differential Input |
VIN,P-P |
200 |
- |
2400 |
mV |
|
Tx_Fault-High |
VFault_H |
Vcc-0.4 |
- |
Vcc |
V |
|
Tx_Fault-Low |
VFault_L |
- |
- |
0.4 |
V |
|
Tx_Disable-High |
VDisable_H |
Vcc-1.3 |
- |
Vcc |
V |
|
Tx_Disable-Low |
VDisable_L |
VEE |
- |
VEE +0.8 |
V |
|
Receiver |
|||||
|
Differential Output Voltage |
VOUT,P-P |
600 |
700 |
1000 |
mVpp |
|
LOS Fault |
VLOS_H |
2.0 |
- |
Vcc |
V |
|
LOS Normal |
VLOS_L |
- |
- |
0.4 |
V |
Pin Assignment & Signal Definition
Table8¡ªConnector pin assignment
|
Pin # |
Pin Name |
Description |
|
1 |
Rx VEE |
Receiver Signal Ground |
|
2 |
RD+ |
Receiver Data Out |
|
3 |
RD- |
Receiver Data Out Bar |
|
4 |
SD |
Signal Detect(Low level for normal operation) |
|
5 |
Rx VCC |
Receiver Power Supply |
|
6 |
Tx VCC |
Transmitter Power Supply |
|
7 |
TD- |
Transmitter Data In Bar |
|
8 |
TD+ |
Transmitter Data In |
|
9 |
Tx VEE |
Transmitter Ground |
Ordering information
|
Part Number |
Product Description |
|
FTTR-15U9-20 |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-20KM-SC, 0?C ~ +70?C |
|
FTTR-13U9-20 |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-20KM-SC, 0?C ~ +70?C |
|
FTTR-15U9-40 |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-40KM-SC, 0?C ~ +70?C |
|
FTTR-13U9-40 |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-40KM-SC, 0?C ~ +70?C |
|
FTTR-15U9-20F |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-20KM-FC, 0?C ~ +70?C |
|
FTTR-13U9-20F |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-20KM-FC, 0?C ~ +70?C |
|
FTTR-15U9-40F |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-40KM-FC, 0?C ~ +70?C |
|
FTTR-13U9-40F |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-40KM-FC, 0?C ~ +70?C |
|
FTTR-15U9-20T |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-20KM-ST, 0?C ~ +70?C |
|
FTTR-13U9-20T |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-20KM-ST, 0?C ~ +70?C |
|
FTTR-15U9-40T |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-40KM-ST, 0?C ~ +70?C |
|
FTTR-13U9-40T |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-40KM-ST, 0?C ~ +70?C |
|
FTTR-15U9-20I |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-20KM-SC, -40 to +85¡ãC |
|
FTTR-13U9-20I |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-20KM-SC, -40 to +85¡ãC |
|
FTTR-15U9-40I |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-40KM-SC, -40 to +85¡ãC |
|
FTTR-13U9-40I |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-40KM-SC, -40 to +85¡ãC |
|
FTTR-15U9-20FI |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-20KM-FC, -40 to +85¡ãC |
|
FTTR-13U9-20FI |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-20KM-FC, -40 to +85¡ãC |
|
FTTR-15U9-40FI |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-40KM-FC, -40 to +85¡ãC |
|
FTTR-13U9-40FI |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-40KM-FC, -40 to +85¡ãC |
|
FTTR-15U9-20TI |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-20KM-ST, -40 to +85¡ãC |
|
FTTR-13U9-20TI |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-20KM-ST, -40 to +85¡ãC |
|
FTTR-15U9-40TI |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-40KM-ST,-40 to +85¡ãC |
|
FTTR-13U9-40TI |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-40KM-ST, -40 to +85¡ãC |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.
Related Products
2~100Mbps 1x9µ¥Ä£¹âÄ£¿é
2~100Mbps 1x9µ¥Ä£¹âÄ£¿é:2~100Mbps 1 x 9 TTL Transceiver Module,F-tone¡¯sFLTR-1x02-xx series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules support data rates up 2 to 100 Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver modules suppliesthe TTL interface of 5.0 Voltage and provide the system designer with products to implement arange of low-speed data and digital video transmission designs at the 2 to 84 Mbps rate for fiber communications.Commerce level transceiver module which operating at 0¡æ to 70¡æ and Industry level which operating extended temperature as -40¡æ to +85¡æ for available.
2~52Mbps 1x9 TTL MM Transceiver
2~52Mbps 1x9 TTL MM Transceiver £¬F-tone¡¯sFLTR-8502H-05X series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules support data rates up 2 to 52 Mbps. These modules are fully compliant with the Multi-sourced 1¡Á9 protocol.The transceiver modules suppliesthe TTL interface of 5.0 Voltage and provide the system designer with products to implement arange of low-speed data and digital video transmission designs at the 2 to 52 Mbps rate for fiber
1¡Á9 0~10Mbps SM TTL Transceiver Module
1¡Á9 0~10Mbps SM TTL Transceiver Module£ºF-tone¡¯sFTLR-xx00(H)-XX 0~10M series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules supplies the 5 or 3.3 Voltage ,The modules supplies the 5 or 3.3 Voltage , These modules Applied to RS232¡¢RS485 optical-electrical converter for industrial control and electric power control with data rates up to 10Mbps £¬These modules are fully compliant with the Multi-sourced 1¡Á9 protocol.Commerce level transceiver module which operating case temperature range at 0¡æ to 70¡æ and industry level which operating case temperature at -40¡æ to +85¡æ for available.
1x9 84Mbps MM Transmitter Module
1x9 84Mbps MM Transmitter Module:F-tone¡¯sFLTX-XX02-XX series of receiver modules are the perfect solution for Low-speed communication networks.The transmitter modules support data rates up to 84Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transmitter modules supplies the 3.3/5 Voltage and provides the system designer with products to implement a range of low-speed data at the 2 Mbps to 84Mbps rate for fiber communications.
1x9-155M-20km transceiver
1x9-155M-20km transceiver
1.Feature
- 1¡Á9 package with FC connector
- 1310nm FP Laser and PIN photodetector
- 20Km transmission with SMF
- +5.0V single power supply
- PECL compatible data input/output interface
- Low EMI and excellent ESD protection
- laser safety standard IEC-60825 compliant
- Compatible with RoHS
2.Application
- Ethernet
- Telecom
622Mbps 1x9 SM Transceiver Module
622Mbps 1x9 SM Transceiver Module:F-tone¡¯s FTTR-1X06X-X series of transceiver modules are the perfect solution for high-speed communication networks.The transceiver modules support data rates up to 622Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver modules supplies the Differential PECL of3.3V, 5V, 3.3V/5.0V Voltage and provide the system designer with products to implement arange of FDDI and ATM (Asynchronous Transfer Mode) designs at the 622Mbps rateandSONET/OC-12, SDH/STM-4 for Telecommunication.Business level transceiver module which operating at 0¡æ to 70¡æ and Industry level which operating extended temperature as -40¡æ to +85¡æ for available.