±ê×¼¹âÄ£¿é
8G CWDM SFP+
Specifications
- ²úÆ·ÐͺÅ: FTCS-CXX8G-XXX
- ¼æÈÝÆ·ÅÆ: ȫϵÁÐ
- ·â×°ÀàÐÍ: SFP+
- ´«ÊäËÙÂÊ: Tri Rate 1.0625/2.125/4.25/8.5Gbs Fiber Channel
- ´«Êä¾àÀë: 10km/20KM/40km/80KM/120km
- ·¢É䲨³¤: CWDM
- ½ÓÊÕ²¨³¤: CWDM
- ÊÂÇéζÈ: ÉÌÒµ¼¶0¡æ¡«+70¡æ/¹¤Òµ¼¶-40¡æ¡«+85¡æ ¿ÉÑ¡
- Êý×ÖÕï¶Ï: ´øDDM
- ½ÓÊÕÁéÃô¶È: 10km/20KM/40km/80KM/120km
- ½ÓÊÕÁéÃô¶È: 10km/20KM/40km/80KM/120km
Description
8.5Gbps CWDM SFP+ Fiber Channel Optical Transceiver
Features
- Up to 8.5Gb/s data links
- Hot Pluggable SFP+ footprint
- 18-Wavelengths CWDMDFB transmitter from 1270nm to 1610nm, PIN photo-detector
- Transmission distance up to 10km/20KM/40km/80KM/120km on 9/125 ¦Ìm SMF
- Digital Status monitoring Interface
- Duplex LC connector
- RoHS compliant and Lead Free
- Metal enclosurefor lower EMI
- Single 3.3V power supply
- Operating case temperature: 0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)
- Compliant with FC-PI-4 800-Mx-SN-I, SFF-8431 , SFF-8432 and SFF-8472
Applications
- Tri Rate 1.0625/2.125/4.25/8.5Gbs Fiber Channel
Product description
FTCS-CXX8G-XX transceivers are designed for using in Fiber Channel links up to 8.5Gb/s data rate over multimode fiber and compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI.
Pin definition
The SFP+ modules are hot-pluggable. Hot pluggable refers to plugging in or unplugging a module while the host board is powered. The SFP+ host connector is a 0.8 mm pitch 20 position right angle improved connector specified by SFF-8083, or stacked connector with equivalent with equivalent electrical performance.
¶©»õÐÅÏ¢/Ordering information :
| Part No. | Description |
| FTCS-CXX8G-10X | DWDM SFP+ 10G 10KM, XX(X)=differentcablelengths,0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial) |
| FTCS-DXX8G-20X | DWDM SFP+ 10G 20KM, XX(X)=differentcablelengths,0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial) |
| FTCS-CXX8G-40X | DWDM SFP+ 10G 40KM, XX(X)=differentcablelengths,0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial) |
| FTCS-CXX8G-80X | DWDM SFP+ 10G 80KM, XX(X)=differentcablelengths,0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial) |
| FTCS-CXX8G-120X | DWDM SFP+ 10G 120KM, XX(X)=differentcablelengths,0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial) |
ÏàÓ¦µÄ´«Ê䲨³¤ÓЦËc Wavelength Guide
| Channel Product Code | Wavelength | 40Channel Product Code | Wavelength | Channel Product Code | Wavelength |
| 27 | 1270nm | 29 | 1290nm | 31 | 1310nm |
| 33 | 1330nm | 35 | 1350nm | 37 | 1370nm |
| 39 | 1390nm | 41 | 1410nm | 43 | 1430nm |
| 45 | 1450nm | 47 | 1470nm | 49 | 1490nm |
| 51 | 1510nm | 53 | 1530nm | 55 | 1550nm |
| 57 | 1570nm | 59 | 1590nm | 61 | 1610nm |
Related Products
SFP+ 850nm¶àÄ£¹âÄ£¿é
- Hot-pluggable SFP+ footprint
- Supports rate selectable 1.25 Gb/sOr 9.95 to 10.3 Gb/s bit rates
- Power dissipation < 1W
- RoHS-6 compliant ( lead-free )
- Single 3.3V power supply
- Maximum link length of 300m on2000 MHZ-km MMF
- Uncooled 850nm VCSEL laser
- Receiver limiting electrical interface
- Duplex LC Connector
- Built-in digital diagnostic functions
- Commercial temperature range£º 0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)
10Gbps SFP+ 10KMµ¥Ä£¹âÄ£¿é
- Optical interface compliant to IEEE 802.3ae 10GBASE-LR
- Electrical interface compliant to SFF-8431
- Hot Pluggable
- 1310nm DFB transmitter, PIN photo-detector
- Operating case temperature: 0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)
- Low power consumption
- Applicable for 10km SMF connection
- All-metal housing for superior EMI performance
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
BiDi SFP+ 10G 10km
BiDi SFP+ 10G 10kmµ¥ÏËË«ÏòÍòÕ×¹âÄ£¿é£¬Ö§³Ö10G´«ÊäËÙÂÊ£¬·¢É䲿·Ö½ÓÄɵͲü¶¶¡¢¸ßÐÔ ÄÜµÄ 1330nm/1270nm DFB¼¤¹â×é¼þ(1330/1270ÄÉÃײ¨³¤)£¬¿ÉÖ§³Ö×î´ó´«Êä¾àÀë10km¡£Ö§³ÖÈȲå°Î£¬µ¥ÏËË«Ïò´«Ê䣬´ø Êý×ÖÕï¶Ï¼à¿Ø¹¦Ð§£¬Ö§³ÖÉÌÒµ¼¶Î¶ȹæÄ££¨ 0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)£©¡£ Ö÷ÒªÓ¦ÓÃÔÚ10GBASE LR EthernetÒÔÌ«Íø£¬10G LW Fibre Channel¹âÏËͨµÀµÈÁìÓò¡£
BiDi SFP+ 10G 20km
- Supports 9.95Gb/s to 10.3Gb/s data rates
- Simplex LC Connector Bi-Directional SFP+ Optical Transceiver
- Single 3.3V Supply
- Up to 20km on 9/125um SMF
- A:1270nm DFB Laser transmitter,1330nm receiver
- B:1330nm DFB Laser transmitter,1270nm receiver
- Compliant with IEEE 802.3ae 10GBASE-LRand 10GBASE-LW
- SFP+ MSA SFF-8431 Compliant
- Digital Diagnostic SFF-8472 Compliant
- RoHS compliant and Lead Free
- Operating case temperature:0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)
DWDM SFP+ 10G 80KM
- Compliant with SFF-8431 and IEE802.3ae
- Suitable for use in 100GHz channel spacing DWDM systems
- Data rate selectable ¡Ü4.25Gbps or 9.95Gbps to 10.3Gbps bit rates
- Cooled EML transmitter and PIN receiver
- link length up to 80km
- Low Power Dissipation 1.5W Maximum
- Operating Case Temperature:Standard : 0 to +70¡ãC / Industrial : -40 to +85¡ãC
- Single 3.3V power supply
- Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
50GHz DWDM SFP+
- SFP+ Single-Mode for DWDM Application
- Duplex SFP+ Transceiver
- Digital Diagnostic Function
- RoHS6 Compliant
- Available in all C-Band Wavelengths on the 50GHz
- DWDM ITU Grid
- Temperature-Stabilized DWDM EML Transmitter
- Duplex LC Connector
- Power Dissipation £¼1.5W
- Dispersion tolerance from -300ps/nm to 800ps/nm
- Hot-Pluggable SFP+ Footprint
- Compliant with SFF-8431 MSA
- Compliant with SFF-8432 MSA
- Operating Case Temperature:0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)