´ó±¦ÓéÀÖ

¼æÈݹâÄ£¿é

°²»ª¸ßFiber Optics¹âÄ£¿é

°²»ª¸ßFiber Optics¹âÄ£¿é

Fiber Optics

     The Avago AFBR-7IERxxZ is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Active Optical Cable (AOC) to 4x SFP+ Active Optical Cable break-out solution.  This “Octopus” cable is intended for 40G to 4x 10G applications.

The AFBR-7IERxxZ  is a high performance cable for short-range multi-lane data communication and interconnect applications.  It integrates four data lanes in each direction with 40 Gbps aggregate bandwidth. Each lane can operate at 10.3125 Gbps. These cables also support 4x10G InfiniBand QDR applications and are backward compatible to the 4x5G IB DDR and 4x2.5G IB single IB SDR applications.

°²»ª¸ßAvago SFP¹âÄ£¿é

FT AFBR-775BxxxZ/785BxxxZ

AFBR-775BxxxZ/785BxxxZ

AFBR-775BxxxZ/785BxxxZ
     The purpose of this evaluation kit is to provide designers with a convenient way to evaluate the AFBR-775BxxxZ/785BxxxZ pluggable parallel fiber optic modules. The application note describes the details of the evaluation kit , AFBR-7705EKZ (Transmitter Board) and AFBR-7805EKZ (Receiver Board) as well as some recommended test configurations and equipment that should be used during module evaluation.

Evaluation Kit for MicroPOD12x10G, 12x12.5G and 12x14G Modules

AFBR-77EVK

 AFBR-77EVK 
 
          The Avago AFBR-77EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago MicroPOD 12x10G, 12x12.5G and 12x14G embedded optical transmitter/receiver modules. A downloadable user guide is available upon request, which provides full description of the evaluation kit and graphical user interface (GUI) along with basic operating instructions. The evaluation kit includes the following:

FT  AFBR-7QERxxZ

AFBR-7QERxxZ

 AFBR-7QERxxZ

     The Avago AFBR-7QERxxZ is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Active Optical Cable (AOC) solution for 40 Gigabit Ethernet Applications. The AFBR-7QERxxZ is a high performance cable for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps aggregate bandwidth. Each lane can operate at 10.3125 Gbps. These cables also support 4x10G InfiniBand QDR applications and are backward compatible to the 4x5G IB DDR and 4x2.5G IB single IB SDR applications.

FT AFBR-83CDxxZ

AFBR-83CDxxZ

AFBR-83CDxxZ

        The Avago AFBR-83CDxxZ is a pluggable 12-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 12.5Gbps proprietary interconnect, 100 Gigabit Ethernet (100GbE) and 12×10G InfiniBand (IB) QDR applications.
 The AFBR-83CDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit

FT  AFBR-83EVK

AFBR-83EVK

 AFBR-83EVK 

      The Avago AFBR-83EVK evaluation kit is designed to provide designers with a convenient means of evaluating the electrical and optical performance of Avago CXP and CXP AOC fiber optic transceiver modules. 

FT  AFCT-5716Z

AFCT-5716Z

 AFCT-5716Z

         The purpose of the Avago AFCT-5716Z evaluation kit is to provide designers with a convenient means of evaluating Avago SFP+ and SFP+ AOC fiber optic transceiver modules supporting 16G fiber channel (16GFC) and 10G Ethernet applications. The evaluation kit is compliant with ANSI Fibre Channel FC-PI-5 for high speed electrical and optical specifications. The AFCT-5716Z provides SMA connectors for high speed Tx and Rx signals. The low speed control signals such as Tx_Fault, Rx_LOS and Rate_Selects can be controlled by using on-board switches and test points. A connector for 2 wire serial interface to the module is also provided.

AFBR-2CARxxZ

AFBR-2CARxxZ

AFBR-2CARxxZ

´ó±¦ÓéÀÖרҵÑб¬·¢²ú¼æÈÝ°²»ª¸ßAFBR-2CARxxZ,Avago AFBR-2CARxxZ,°²»ª¸ßAFBR-2CARxxZ¹âÄ£¿é,Avago AFBR-2CARxxZ¹âÄ£¿é,°²»ª¸ßAFBR-2CARxxZ¹âÏËÄ£¿é,Avago AFBR-2CARxxZ¹âÏËÄ£¿é,°²»ª¸ßAvago AFBR-2CARxxZ¹âÄ£¿é,°²»ª¸ßAvago AFBR-2CARxxZ¹âÏËÄ£¿é£¬100%ÍêÃÀ¼æÈÝ°²»ª¸ßAvago AFBR-2CARxxZ¹âÄ£¿é:µçÆø²ÎÊý¼æÈÝ£¬¹âѧ²ÎÊý¼æÈÝ¡£

FT AFBR-2CARxxZ

AFBR-2CARxxZ

AFBR-2CARxxZ

         The Avago AFBR-2CARxxZ Active Optical Cable (AOC) is part of a family of SFP+ products to serve 10Gb Ethernet (10GbE) applications. The letters “xx” of the part number AFBR-2CARxxZ denote the cable length in meters. The AFBR-2CARxxZ enables 10GbE equipment designs with very high port density based on the electrical and mechanical specification enhancements to the well known SFP specifications developed by the SFF committee. The specifications are referred to as “SFP+” to represent the enhancements over previous SFP specifications. The SFP+ AOCs have a cable length up to 20m. These AOCs can be used as an alternative solution to SFP+ passive and active copper cables, while providing improved signal integrity, longer reach, superior electromagnetic immunity and better bit error rate performance

 10G Ethernet SFP+ Active Optical Cable (AOC)

AFBR-2CARxxZ

AFBR-2CARxxZ

         The Avago AFBR-2CARxxZ Active Optical Cable (AOC) is part of a family of SFP+ products to serve 10Gb Ethernet (10GbE) applications. The letters “xx” of the part number AFBR-2CARxxZ denote the cable length in meters.

FT AFBR-7705EKZ

AFBR-7705EKZ

AFBR-7705EKZ 
        The purpose of this evaluation kit is to provide designers with a convenient way to evaluate the AFBR-7705EKZ pluggable parallel fiber optic modules. 

AFBR-77D2SZ

AFBR-77D2SZ

AFBR-77D2SZ

´ó±¦ÓéÀÖרҵÑб¬·¢²ú¼æÈÝ°²»ª¸ßAFBR-77D2SZ,Avago AFBR-77D2SZ,°²»ª¸ßAFBR-77D2SZ¹âÄ£¿é,Avago AFBR-77D2SZ¹âÄ£¿é,°²»ª¸ßAFBR-77D2SZ¹âÏËÄ£¿é,Avago AFBR-77D2SZ¹âÏËÄ£¿é,°²»ª¸ßAvago AFBR-77D2SZ¹âÄ£¿é,°²»ª¸ßAvago AFBR-77D2SZ¹âÏËÄ£¿é£¬100%ÍêÃÀ¼æÈÝ°²»ª¸ßAvago AFBR-77D2SZ¹âÄ£¿é:µçÆø²ÎÊý¼æÈÝ£¬¹âѧ²ÎÊý¼æÈÝ¡£

FT AFBR-77EVK

AFBR-77EVK

AFBR-77EVK
      The Avago AFBR-77EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago MicroPOD  12x10G, 12x12.5G and 12x14G embedded optical transmitter/receiver modules. A downloadable user guide is available upon request

AFBR-78D2SZ

AFBR-78D2SZ

AFBR-78D2SZ

´ó±¦ÓéÀÖרҵÑб¬·¢²ú¼æÈÝ°²»ª¸ßAFBR-78D2SZ,Avago AFBR-78D2SZ,°²»ª¸ßAFBR-78D2SZ¹âÄ£¿é,Avago AFBR-78D2SZ¹âÄ£¿é,°²»ª¸ßAFBR-78D2SZ¹âÏËÄ£¿é,Avago AFBR-78D2SZ¹âÏËÄ£¿é,°²»ª¸ßAvago AFBR-78D2SZ¹âÄ£¿é,°²»ª¸ßAvago AFBR-78D2SZ¹âÏËÄ£¿é£¬100%ÍêÃÀ¼æÈÝ°²»ª¸ßAvago AFBR-78D2SZ¹âÄ£¿é:µçÆø²ÎÊý¼æÈÝ£¬¹âѧ²ÎÊý¼æÈÝ¡£

AFBR-78D4SZ

AFBR-78D4SZ

AFBR-78D4SZ

´ó±¦ÓéÀÖרҵÑб¬·¢²ú¼æÈÝ°²»ª¸ßAFBR-78D4SZ,Avago AFBR-78D4SZ,°²»ª¸ßAFBR-78D4SZ¹âÄ£¿é,Avago AFBR-78D4SZ¹âÄ£¿é,°²»ª¸ßAFBR-78D4SZ¹âÏËÄ£¿é,Avago AFBR-78D4SZ¹âÏËÄ£¿é,°²»ª¸ßAvago AFBR-78D4SZ¹âÄ£¿é,°²»ª¸ßAvago AFBR-78D4SZ¹âÏËÄ£¿é£¬100%ÍêÃÀ¼æÈÝ°²»ª¸ßAvago AFBR-78D4SZ¹âÄ£¿é:µçÆø²ÎÊý¼æÈÝ£¬¹âѧ²ÎÊý¼æÈÝ¡£

FT AFBR-79EXBZ

AFBR-79EXBZ

AFBR-79EXBZ

         The AFBR-79EXBZ QSFP+ extender board is designed to provide access to Avago QSFP+ module's low-speed control signals while a DUT (QSFP+ compliant to INF-8436) is plugged into the target application system such as a network switch or router.

FT AFBR-79Q2EKZ

AFBR-79Q2EKZ

AFBR-79Q2EKZ
 
     The Avago AFBR-79Q2EKZ evaluation kit is designed to provide designers with a convenient means of evaluating Avago QSFP/QSFP+ and QSFP+ AOC fiber optic transceiver modules. Designers can evaluate the management interface as well as the electrical and optical performance. A downloadable user guide is available which provides full description of the evaluation kit and graphical user interface (GUI) along with basic operating instructions.

FT AFBR-79Q2EKZ

AFBR-79Q2EKZ

AFBR-79Q2EKZ
         The Avago AFBR-79Q2EKZ evaluation kit is designed to provide designers with a convenient means of evaluating Avago QSFP/QSFP+ and QSFP+ AOC fiber optic transceiver modules. Designers can evaluate the management interface as well as the electrical and optical performance. A downloadable user guide is available which provides full description of the evaluation kit and graphical user interface (GUI) along with basic operating instructions.
A list of Avago QSFP+ and QSFP+ AOC products supported by the evaluation kit includes (but is not limited to) the following:

AFBR-7QERxxZ

AFBR-7QERxxZ

AFBR-7QERxxZ

´ó±¦ÓéÀÖרҵÑб¬·¢²ú¼æÈÝ°²»ª¸ßAFBR-7QERxxZ,Avago AFBR-7QERxxZ,°²»ª¸ßAFBR-7QERxxZ¹âÄ£¿é,Avago AFBR-7QERxxZ¹âÄ£¿é,°²»ª¸ßAFBR-7QERxxZ¹âÏËÄ£¿é,Avago AFBR-7QERxxZ¹âÏËÄ£¿é,°²»ª¸ßAvago AFBR-7QERxxZ¹âÄ£¿é,°²»ª¸ßAvago AFBR-7QERxxZ¹âÏËÄ£¿é£¬100%ÍêÃÀ¼æÈÝ°²»ª¸ßAvago AFBR-7QERxxZ¹âÄ£¿é:µçÆø²ÎÊý¼æÈÝ£¬¹âѧ²ÎÊý¼æÈÝ¡£

AFBR-811VxyZ

AFBR-811VxyZ

AFBR-811VxyZ

´ó±¦ÓéÀÖרҵÑб¬·¢²ú¼æÈÝ°²»ª¸ßAFBR-811VxyZ,Avago AFBR-811VxyZ,°²»ª¸ßAFBR-811VxyZ¹âÄ£¿é,Avago AFBR-811VxyZ¹âÄ£¿é,°²»ª¸ßAFBR-811VxyZ¹âÏËÄ£¿é,Avago AFBR-811VxyZ¹âÏËÄ£¿é,°²»ª¸ßAvago AFBR-811VxyZ¹âÄ£¿é,°²»ª¸ßAvago AFBR-811VxyZ¹âÏËÄ£¿é£¬100%ÍêÃÀ¼æÈÝ°²»ª¸ßAvago AFBR-811VxyZ¹âÄ£¿é:µçÆø²ÎÊý¼æÈÝ£¬¹âѧ²ÎÊý¼æÈÝ¡£

AFBR-812VxyZ

AFBR-812VxyZ

AFBR-812VxyZ

´ó±¦ÓéÀÖרҵÑб¬·¢²ú¼æÈÝ°²»ª¸ßAFBR-812VxyZ,Avago AFBR-812VxyZ,°²»ª¸ßAFBR-812VxyZ¹âÄ£¿é,Avago AFBR-812VxyZ¹âÄ£¿é,°²»ª¸ßAFBR-812VxyZ¹âÏËÄ£¿é,Avago AFBR-812VxyZ¹âÏËÄ£¿é,°²»ª¸ßAvago AFBR-812VxyZ¹âÄ£¿é,°²»ª¸ßAvago AFBR-812VxyZ¹âÏËÄ£¿é£¬100%ÍêÃÀ¼æÈÝ°²»ª¸ßAvago AFBR-812VxyZ¹âÄ£¿é:µçÆø²ÎÊý¼æÈÝ£¬¹âѧ²ÎÊý¼æÈÝ¡£

FT AFBR-81uVxyZ

AFBR-81uVxyZ

AFBR-81uVxyZ 

   The purpose of this evaluation kit is to provide designers with a convenient way to evaluate the electrical and optical performance of Avago 12-channel MiniPOD transmitter and receiver modules. A downloadable user guide is available upon request, which provides full description of the evaluation kit along with basic operating instructions.

AFBR-821vx3Z

AFBR-821vx3Z

AFBR-821vx3Z

´ó±¦ÓéÀÖרҵÑб¬·¢²ú¼æÈÝ°²»ª¸ßAFBR-821vx3Z,Avago AFBR-821vx3Z,°²»ª¸ßAFBR-821vx3Z¹âÄ£¿é,Avago AFBR-821vx3Z¹âÄ£¿é,°²»ª¸ßAFBR-821vx3Z¹âÏËÄ£¿é,Avago AFBR-821vx3Z¹âÏËÄ£¿é,°²»ª¸ßAvago AFBR-821vx3Z¹âÄ£¿é,°²»ª¸ßAvago AFBR-821vx3Z¹âÏËÄ£¿é£¬100%ÍêÃÀ¼æÈÝ°²»ª¸ßAvago AFBR-821vx3Z¹âÄ£¿é:µçÆø²ÎÊý¼æÈÝ£¬¹âѧ²ÎÊý¼æÈÝ¡£

AFBR-83EDxxZ

AFBR-83EDxxZ

AFBR-83EDxxZ

´ó±¦ÓéÀÖרҵÑб¬·¢²ú¼æÈÝ°²»ª¸ßAFBR-83EDxxZ,Avago AFBR-83EDxxZ,°²»ª¸ßAFBR-83EDxxZ¹âÄ£¿é,Avago AFBR-83EDxxZ¹âÄ£¿é,°²»ª¸ßAFBR-83EDxxZ¹âÏËÄ£¿é,Avago AFBR-83EDxxZ¹âÏËÄ£¿é,°²»ª¸ßAvago AFBR-83EDxxZ¹âÄ£¿é,°²»ª¸ßAvago AFBR-83EDxxZ¹âÏËÄ£¿é£¬100%ÍêÃÀ¼æÈÝ°²»ª¸ßAvago AFBR-83EDxxZ¹âÄ£¿é:µçÆø²ÎÊý¼æÈÝ£¬¹âѧ²ÎÊý¼æÈÝ¡£

FT AFBR-83EDxxZ

AFBR-83EDxxZ

AFBR-83EDxxZ

       The Avago AFBR-83EDxxZ is a pluggable 10-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 10Gbps proprietary interconnect and 100 Gigabit Ethernet (100GbE) applications.

The AFBR-83EDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

FT AFBR-83PDxxZ

AFBR-83PDxxZ

AFBR-83PDxxZ

      The Avago AFBR-83PDxxZ is a  pluggable 12-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 10Gbps proprietary interconnect, 100 Gigabit Ethernet (100GbE) and 12×10G InfiniBand (IB) QDR applications.
 The AFBR-83PDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

FT AFBR-8420EVK

AFBR-8420EVK

AFBR-8420EVK

         The Avago AFBR-8420EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago 100G CFP2 SR10 module. The evaluation kit supports the Avago AFBR-8420Z, a 10-channel pluggable, multi-mode parallel optic transceiver module for high-density 100G Ethernet and Optical Transport Network (OTN) applications.

AFBR-86EDxxZ

AFBR-86EDxxZ

AFBR-86EDxxZ

´ó±¦ÓéÀÖרҵÑб¬·¢²ú¼æÈÝ°²»ª¸ßAFBR-86EDxxZ,Avago AFBR-86EDxxZ,°²»ª¸ßAFBR-86EDxxZ¹âÄ£¿é,Avago AFBR-86EDxxZ¹âÄ£¿é,°²»ª¸ßAFBR-86EDxxZ¹âÏËÄ£¿é,Avago AFBR-86EDxxZ¹âÏËÄ£¿é,°²»ª¸ßAvago AFBR-86EDxxZ¹âÄ£¿é,°²»ª¸ßAvago AFBR-86EDxxZ¹âÏËÄ£¿é£¬100%ÍêÃÀ¼æÈÝ°²»ª¸ßAvago AFBR-86EDxxZ¹âÄ£¿é:µçÆø²ÎÊý¼æÈÝ£¬¹âѧ²ÎÊý¼æÈÝ¡£

AFBR-86YDxxZ

AFBR-86YDxxZ

AFBR-86YDxxZ

´ó±¦ÓéÀÖרҵÑб¬·¢²ú¼æÈÝ°²»ª¸ßAFBR-86YDxxZ,Avago AFBR-86YDxxZ,°²»ª¸ßAFBR-86YDxxZ¹âÄ£¿é,Avago AFBR-86YDxxZ¹âÄ£¿é,°²»ª¸ßAFBR-86YDxxZ¹âÏËÄ£¿é,Avago AFBR-86YDxxZ¹âÏËÄ£¿é,°²»ª¸ßAvago AFBR-86YDxxZ¹âÄ£¿é,°²»ª¸ßAvago AFBR-86YDxxZ¹âÏËÄ£¿é£¬100%ÍêÃÀ¼æÈÝ°²»ª¸ßAvago AFBR-86YDxxZ¹âÄ£¿é:µçÆø²ÎÊý¼æÈÝ£¬¹âѧ²ÎÊý¼æÈÝ¡£

AFBR-8CERxxZ

AFBR-8CERxxZ

AFBR-8CERxxZ

´ó±¦ÓéÀÖרҵÑб¬·¢²ú¼æÈÝ°²»ª¸ßAFBR-8CERxxZ,Avago AFBR-8CERxxZ,°²»ª¸ßAFBR-8CERxxZ¹âÄ£¿é,Avago AFBR-8CERxxZ¹âÄ£¿é,°²»ª¸ßAFBR-8CERxxZ¹âÏËÄ£¿é,Avago AFBR-8CERxxZ¹âÏËÄ£¿é,°²»ª¸ßAvago AFBR-8CERxxZ¹âÄ£¿é,°²»ª¸ßAvago AFBR-8CERxxZ¹âÏËÄ£¿é£¬100%ÍêÃÀ¼æÈÝ°²»ª¸ßAvago AFBR-8CERxxZ¹âÄ£¿é:µçÆø²ÎÊý¼æÈÝ£¬¹âѧ²ÎÊý¼æÈÝ¡£

FT AFCT-5716EXBZ

AFCT-5716EXBZ

AFCT-5716EXBZ 

       The SFP extender board was designed to access SFP low speed control signals while a DUT SFP compliant to SFF-8074 is plugged into the target application system such as a network switch and router. The TX & RX high speed signals are routed on the board with 50 ohm transmission lines to maintain signal integrity. 

FT AFCT-5716Z

AFCT-5716Z

AFCT-5716Z
 
         The purpose of the Avago AFCT-5716Z evaluation kit is to provide designers with a convenient means of evaluating Avago SFP+ and SFP+ AOC fiber optic transceiver modules supporting 16G fiber channel (16GFC) and 10G Ethernet applications. The evaluation kit is compliant with ANSI Fibre Channel FC-PI-5 for high speed electrical and optical specifications. 

 Evaluation Kit for XENPAK Optical Transceivers

Evaluation Kit for XENPAK Optical Transceivers

Evaluation Kit for XENPAK Optical Transceivers

         These displays have a 27.4 mm (1.08 inch) character height and use industry standard size and pin-out. The devices are common row anode configurations. The displays are in black face paint and in Green.

FT SFF-8074

SFF-8074

SFF-8074

              The SFP extender board was designed to access SFP low speed control signals while a DUT SFP compliant to SFF-8074 is plugged into the target application system such as a network switch and router. TX & RX high speed signals are routed on the board with 50 ohm transmission lines to maintain signal integrity.

È«¹ú²ú»¯¹âÄ£¿é CFP2¹âÄ£¿é JYSK¹âÏËÁ¬½ÓÆ÷ ˼¿Æ¹âÄ£¿é Marconi¹âÄ£¿é Test Equipment & Others ¹âÏË·¨À¼ÊÊÅäÆ÷
SFPÈ«¹ú²ú¹âÄ£¿é CFP4¹âÄ£¿é J599IIIµçÁ¬½ÓÆ÷ ˼¿ÆFE SFP ²©´ï¹âÄ£¿é ±£Æ«¹âÆ÷¼þ ¹âÏËÌøÏß&βÏË
1x9È«¹ú²ú¹âÄ£¿é CFP8 400Gbps S6¾ØÐÎÁ¬½ÓÆ÷ ˼¿ÆSFP+¹âÄ£¿é Íø¼þ¹âÄ£¿é In-line Depolarizer FTTAÀ­Ô¶»ùÕ¾¹âÏËÌøÏß
ÌØÖÖ¹âÄ£¿é CDFP 400Gbps S7¾ØÐÎÁ¬½ÓÆ÷ ˼¿ÆXFP¹âÄ£¿é Nortel¹âÄ£¿é In-line Polarizer MPO/MTP¸ßÃܶÈϵÁÐ
25G~400G¸ßËÙ¹âÄ£¿é MicroQSFP¹âÄ£¿é GYM¹âÏËÁ¬½ÓÆ÷ ˼¿ÆCFP¹âÄ£¿é Moxa¹âÄ£¿é IPBC/S ¾üÓÃÒ°Õ½·ÀË®¹âÏËÌøÏß
200km³¬³¤¾à¹âÄ£¿é DSFP¹âÄ£¿é J599III¹âÏËÁ¬½ÓÆ÷ ˼¿ÆQSFP-DD ¹âÄ£¿é º£¿µÍþÊÓHIKVISION¹âÄ£¿é PBC/S ÌØÖÖ¹âÏ˹âÀÂ
5GÒƶ¯Í¨ÐŹâÄ£¿é FT-61¹âÄ£¿é Ë®ÃܹâÀÂÁ¬½ÓÆ÷ ˼¿ÆQSFP+¹âÄ£¿é McAfee¹âÄ£¿é PM BPF ÌØÖÖÏßÀÂ×é¼þ
SFP¹âÄ£¿é OLT¹âÄ£¿é ¹âÏËÁ¬½ÓÆ÷ת½ÓÆ÷ ˼¿ÆGE SFP SMCÖÇ°î¹âÄ£¿é PM Circulator ͨÓùâÀ¹âÏËÌøÏß
1.25G SFP ONU¹âÄ£¿é FT-A4ϵÁÐÁ¬½ÓÆ÷ ˼¿ÆSFP OC3 °²»ª¸ßAvago¹âÄ£¿é PM Collimator MXC? ¶àо¹âÀÂ×é¼þ
CWDM SFP PLCC¹âÄ£¿é USB¹âÏËÑÓ³¤Ïß Ë¼¿ÆSFP OC12 °²»ª¸ßAvago 1x9¹âÄ£¿é PM Coupler PRIZM? LIGHTTURN?×é¼þ
DWDM SFP RJ¹âÄ£¿é HDMI ˼¿ÆSFP OC48 °²»ª¸ßAvago SFF¹âÄ£¿é PM CWDM ¹âÏË»úÏä
BIDI-SFP SFF¹âÄ£¿é ÌØÖÖµçÁ¬½ÓÆ÷ ˼¿ÆGBIC¹âÄ£¿é °²»ª¸ßAvago SFP¹âÄ£¿é PM DWDM SMA-ÌØÊâÏËоϵÁÐ
SGMII SFP SNAP12¹âÄ£¿é Ô²ÐÎÁ¬½ÓÆ÷ ˼¿ÆX2¹âÄ£¿é °²»ª¸ßAvago QSFP28 ¹âÄ£¿é PM Faraday mirror ÌØÊâ½ÓͷϵÁÐ
Video SFP¹âÄ£¿é USOT¹âÄ£¿é ¾ØÐεçÁ¬½ÓÆ÷ ˼¿ÆXENPAK¹âÄ£¿é °²»ª¸ßAvago QSFP+¹âÄ£¿é PM Fiber mirror îøװϵÁÐ
Copper SFP X2¹âÄ£¿é ÌØÖÖ¹âÏ˹âÀ »ªÈý¹âÄ£¿é °²»ª¸ßAvago SNAP12¹âÄ£¿é PM Filter Coupler ¹âñîºÏÆ÷Coupler
µÍ¹¦ºÄSFP Xenpak¹âÄ£¿é ÌØÖÖ¹âÏË »ªÈýSFP °²»ª¸ßAvago ÆäËû¹âÄ£¿é PM Fused Coupler ƤÏËÌøÏßϵÁÐ
SFP+¹âÄ£¿é ¹âµç±àÂëÆ÷Ä£¿é ¹âÏËÆ÷¼þ »ªÈýSFP+ °²»ª¸ß Embedded¹âÄ£¿é PM FWDM ´óоÊýϵÁÐ
CWDM SFP+ ¹âÄ£¿é²âÊÔ°å ÌØÖÖ¹âÀ¼°¹âÀÂ×é¼þ »ªÈýSFP28 ¹âÄ£¿é °²»ª¸ßFiber Optics¹âÄ£¿é PM Isolator »Ø·ÌøÏßϵÁÐ
DWDM SFP+ ¹âÄ£¿éÁý×Ó×ù×Ó ¹âź »ªÈýQSFP+¹âÄ£¿é Industrial Transmitters and Receivers PM Isolator WDM ±£Æ«¹âÏËϵÁÐ
BIDI SFP+ DAC ¸ßËÙÏßÀ ±ê×¼¹âñî »ªÈýQSFP28 ¹âÄ£¿é Optical Transceivers PM PLC ¹âͨÐÅ×é¼þ
Tunable SFP+ ¹âÏË»¬»·|¹âµç»¬»· SMA²âÊÔÏßÀ »ªÈý CFP¹âÄ£¿é ·Éͨ¹âÄ£¿é PM Tap Isolator ¹â¸ôÀëÆ÷isolator
16GFC SFP+ ¹âÀ³µ OSA »ªÈý CXP¹âÄ£¿é Finisar¹âÄ£¿é PM Tap Isolator WDM ÆäËü¹âÆ÷¼þ
25GE SFP+ ¾üÆ·¼¶DIN¹âÄ£¿é PON BOSA »ªÈý CX4¸ßËÙµçÀ ·ÆÄáÈøFinisar SFF¹âÄ£¿é PM VOA ¿Éµ÷Â˲¨Æ÷
32GFC SFP+ ËÜÁϹâÏËÄ£¿é Pigtailed PD »ªÈýXFP yellobrik SDI¹âÄ£¿é ÆäËü±£Æ«Æ÷¼þ ¿Éµ÷Ë¥¼õÆ÷
SFP28¹âÄ£¿é Ìæ»»°²»ª¸ß¹¤ÒµµçÁ¦¹âÄ£¿é RFoG BOSA »ªÈýGE SFP ÂÞ¿ËΤ¶ûAB¹âÄ£¿é ¹â·Ö·Æ÷ À­×¶ñîºÏÆ÷
SFP56¹âÄ£¿é ¼æÈݹú²ú»¯Ìæ»»°²»ª¸ß¹âñî TO-CAN »ªÈýFE SFP Â޽ܿµ¹âÄ£¿é FBTÀ­×¶·Ö·Æ÷ ÎÞÔ´¹âÆ÷¼þ
SFP-DD¹âÄ£¿é ÉäƵ¹âÄ£¿é ¹âÏËζȴ«¸ÐÆ÷ »ªÈýSFP STM-4 ÑлªAdvantech¹âÄ£¿é PLC ¹â·Ö·Æ÷ ·¨À­µÚÐýת¾µ
QSFP¹âÄ£¿é ΢ÐͶà·¹âÄ£¿é ¹âÏËÓ¦±ä´«¸ÐÆ÷ »ªÈýSFP STM-16 È«¹ú²ú»¯¹âÆ÷¼þ PLCƽÃ沨µ¼¹â·Ö·Æ÷ ²¨·Ö¸´ÓÃÆ÷
QSFP+ ¹âÄ£¿é ÌØÖÖ¹âÄ£¿é ¹âÏ˼ÓËٶȴ«¸ÐÆ÷ »ªÈýGBIC¹âÄ£¿é FT-XSϵÁР¹ú²ú»¯°ëµ¼Ìå¹â·Å´óÆ÷ ¹â¿ª¹Ø AWG DWDM²¨·Ö¸´ÓÃÆ÷
QSFP28¹âÄ£¿é HPC²¢ÐйâÄ£¿é ¹âÏßѹÁ¦´«¸ÐÆ÷ »ªÈýBIDI¹âÄ£¿é ¹âÏËÕóÁÐϵÁР̽²âÆ÷ Fused WDM²¨·Ö¸´ÓÃÆ÷
QSFP56¹âÄ£¿é LC-RJ³¬Ð¡Ð͵¥Â·¹âÄ£¿é ¹âÏËλÒÆ´«¸ÐÆ÷ »ªÈýXENPAK¹âÄ£¿é ¸ßËÙÄ£¿é΢Á¬½Ó ¹â¹¦ÂÊ¼Æ FWDM²¨·Ö¸´ÓÃÆ÷
QSFP112 400G¹âÄ£¿é LCC48¹âÄ£¿é ¹âÏËÓ¦Á¦´«¸ÐÆ÷ »ªÈýEPON OLT SFP Ïà¸ÉͨѶ¹âÁ¬½Ó È«¹âÏËÏàλÀ­ÉìÆ÷ Mini΢ÐÍ´Ö²¨·Ö¸´ÓÃÆ÷
QSFP224¹âÄ£¿é LC³¬¶ÌÐ͹âÄ£¿é ¹âÏË´«¸ÐÆÊÎöÒÇ Öк½¹âµç¹âÄ£¿é ¹è¹â×ÓÆ÷¼þ¹âÁ´½Ó ¹âÏË×¼Ö±Æ÷ ¹â·Ö²å¸´ÓÃÆ÷
QSFP-DD¹âÄ£¿é SNAP12¹âÄ£¿é ¹âÏËÂþÑÜʽ²âÎÂÖ÷»ú ÖÐÐ˹âÄ£¿é Bio-Medical Equipment ¹âË¥¼õÆ÷ϵÁÐ ÆäËüÖÖÀನ·Ö¸´ÓÃÆ÷²úƷϵÁÐ
QSFP-DD800¹âÄ£¿é ΢Ð͹âÄ£¿é ¹âÏ˲¼ÀïÔ¨ÐźŽâµ÷ÒÇ Èñ½Ý¹âÄ£¿é Components for Fiber Laser ¹âÆ«Õñ¿ØÖÆÆ÷ Ãܼ¯²¨·Ö¸´ÓÃÆ÷
OSFP 400Gbps ΢ÐͿɲå°ÎBGA¹âÄ£¿é ÂþÑÜʽ¹âÏËÉùÕñÐźŽâµ÷ÒÇ »ÝÆÕ¹âÄ£¿é Components for Fiber sensing ¹âÔ´ ´Ö²¨·Ö¸´ÓÃÆ÷
OSFP 800G¹âÄ£¿é ±íÌùʽµ¥Â·¹âÄ£¿é Camera Link ÉñÖÝÊýÂë¹âÄ£¿é Components for Optical Network ¹â»·ÐÐÆ÷Circulator WDMÄ£¿é
OSFP 1.6T¹âÄ£¿é ÌØÖÖ¹âÏËÁ¬½ÓÆ÷ ¹âÄ£¿é֪ʶ Juniper¹âÄ£¿é EDFA¹âÏË·Å´óÆ÷ ¹âÏËÑÓ³ÙÏß Â˲¨Æ÷
HSFP 1.6T~12.8T¹âÄ£¿é J599¹âÏ˲åÍ·²å×ù »ªÎª¹âÄ£¿é Extreme¹âÄ£¿é ¹âÏË´«¸ÐÆ÷ É«É¢Å⳥ģ¿é µûÐμ¤¹âÆ÷
XFP¹âÄ£¿é ODC¹âÏËÁ¬½ÓÆ÷ϵÁÐ »ªÎªGE SFP Brocade¹âÄ£¿é High power Component ¹âÏË·Å´óÆ÷ ¹âñîºÏÆ÷&·Ö·Æ÷
CWDM XFP ÆäËûÌØÖÖ¹âÏËÁ¬½ÓÆ÷ »ªÎªQSFP+¹âÄ£¿é D-Link¹âÄ£¿é HP In-line Polarizer ÎÞÔ´´«Êäת»»Æ÷ ¹âÏË»·ÐÎÆ÷&·¨À­µÚÐýת¾µ
DWDM XFP Ò°Õ½¹âÏËÁ¬½ÓÆ÷ »ªÎªSFP+ ºÕ˼Âü¹âÄ£¿é HP Isolator ¹âÏ˼¤¹âÆ÷ ¹âÏ˸ôÀëÆ÷&²¨·Ö¸´ÓÃÆ÷
BIDI XFP ÌØÖÖ¹âµçÁ¬½ÓÆ÷ »ªÎªQSFP28 °¢¶û¿¨ÌØÀÊѶ¹âÄ£¿é HP PBC/S ¹âµ÷ÖÆÆ÷ ¹âÏË·ÖÊøÆ÷&ºÏÊøÆ÷£¨PBS/PBC£©
1x9¹âÄ£¿é J599IIIÆéá«Æµ»ì×°Á¬½ÓÆ÷ »ªÎªFE SFP Allied Telesis¹âÄ£¿é Pump Combiner ¹âµç̽²âÆ÷ ¹âÏ˹âÕ¤
CSFP¹âÄ£¿é NGC¹âÏËÁ¬½ÓÆ÷ »ªÎªXFP Foundry¹âÄ£¿é HP Circulator ¹âÏËÆ«Õñ ¸ßËÙÏßÀÂ
CSFP+10G¹âÄ£¿é J599A6¹âÏËÁ¬½ÓÆ÷ »ªÎªSFP OC12 Force10¹âÄ£¿é Pump laser protector ¹âÏËÂ˲¨Æ÷
CXP¹âÄ£¿é GYMB¹âÏËÁ¬½ÓÆ÷ »ªÎªGBIC¹âÄ£¿é Blade¹âÄ£¿é Hybrid for EDFA ͬÖἤ¹âÆ÷
CFP¹âÄ£¿é J599III¹âµçÁ¬½ÓÆ÷ »ªÎªSFP STM16 Linksys¹âÄ£¿é Test Equipment & Others ͬÖáµçÀÂ

028-85255257 | sales@f-tone.com

±ê׼ЭÒé¹âÄ£¿é²úÆ·

¼æÈÝЭÒé¹âÄ£¿é

ÆäËüÖÖÀà¹âÆ÷¼þ

¼¼ÊõÖ§³Ö

ÍøÕ¾µØͼ
ÓÑÇéÁ´½Ó£º¹«º£²Ê´¬  Ð±¦gg´´ÔìÆæ¼£ÔÚÏߵǼ  mg²»ÐàÇéÔµ  w66ÀûÀ´¹ú¼Ê  ×ðÁú¿­Ê±ÈËÉú¾ÍÊDz«  ×ðÁú¿­Ê±¹ÙÍø  ×ðÁú¿­Ê±ÈËÉú¾ÍÊDz«  ×ðÁú¿­Ê±ÈËÉú¾ÍÊDz«  mg²»ÐàÇéÔµ  ×ðÁú¿­Ê±ÈËÉú¾ÍÊDz«  ×ðÁú¿­Ê±ÈËÉú¾ÍÊDz«  hahaÌåÓýƽ̨  wepoker¹ÙÍø  ¿­·¢  ÌÚ²©»á¹ÙÍø