±ê×¼¹âÄ£¿é
BiDi SFP+ 10G 60km
Specifications
- ²úÆ·ÐͺÅ: FTCS-BXX1X-60X
- ¼æÈÝÆ·ÅÆ: ȫϵÁÐ
- ·â×°ÀàÐÍ: SFP+
- ´«ÊäËÙÂÊ: 10GÍòÕ×
- ´«Êä¾àÀë: 60KM
- ·¢É䲨³¤: 1330nm/1270nm
- ½ÓÊÕ²¨³¤: 1270nm/1330nm
- ÊÂÇéζÈ: ÉÌÒµ¼¶0¡æ¡«+70¡æ/¹¤Òµ¼¶-40¡æ¡«+85¡æ ¿ÉÑ¡
- Êý×ÖÕï¶Ï: ´øDDM
- ½ÓÊÕÁéÃô¶È: 60KM
- ½ÓÊÕÁéÃô¶È: 60KM
Description
10Gbps SFP+ Bi-Directional Transceiver, 60km Reach
1270/1330nm TX / 1330/1270 nm RX
Features
- Supports 9.95Gb/s to 10.3Gb/s data rates
- Simplex LC Connector Bi-Directional SFP+ Optical Transceiver
- Single 3.3V Supply
- Up to 60km on 9/125um SMF
- A:1270nm DFB Laser transmitter,1330nm receiver
- B:1330nm DFB Laser transmitter,1270nm receiver
- Compliant with IEEE 802.3ae 10GBASE-ERand 10GBASE-EW
- SFP+ MSA SFF-8431 Compliant
- Digital Diagnostic SFF-8472 Compliant
- RoHS compliant and Lead Free
- Operating case temperature:0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)
Applications
- 10GBASE-ER at 10.3125Gbps
- 10GBASE-EW at 9.953Gbps
- Other Optical Links
Product description
The FTCS-BXX1X-60XX series single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-ER/EW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability.
The FTCS-BXX1X-60XX module is designed for single mode fiber and operates at a nominal wavelength of 1270nm or 1330nm; The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.
The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
Absolute Maximum Ratings
These values represent the damage threshold of the module. Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions.
|
Parameters |
Symbol |
Min. |
Max. |
Unit |
|
Supply Voltage |
VCC |
-0.5 |
+3.6 |
V |
|
Storage Temperature |
Tc |
-40 |
+85 |
¡ãC |
|
Operating Case Temperature |
Tc |
0 |
+70 |
¡ãC |
|
Relative Humidity |
RH |
0 |
85 |
% |
Recommended Operating Conditions
|
Parameter |
Symbol |
Min. |
Typical |
Max |
Unit |
|
Supply Voltage |
VCC |
3.0 |
3.3 |
3.6 |
V |
|
Supply Current |
Icc |
200 |
300 |
mA |
|
|
Operating Case Temperature |
TC |
0 |
25 |
70 |
¡ãC |
|
Module Power Dissipation |
Pm |
- |
0.7 |
1.1 |
W |
Notes:
[1] Supply current is shared between VCCTX and VCCRX.
[2] In-rush is defined as current level above steady state current requirements.
| Part No. | Description |
| FTCS-B231X-60 | 1270nm/1330nm, 10Gbps, 60km, 0?C ~ +70?C |
| FTCS-B321X-60 | 1330nm/1270nm, 10Gbps, 60km, 0?C ~ +70?C |
| FTCS-B231X-60I | 1270nm/1330nm, 10Gbps, 60km, -60~+85¡æ |
| FTCS-B321X-60I | 1330nm/1270nm, 10Gbps, 60km, -60~+85¡æ |
Related Products
SFP+ 850nm¶àÄ£¹âÄ£¿é
- Hot-pluggable SFP+ footprint
- Supports rate selectable 1.25 Gb/sOr 9.95 to 10.3 Gb/s bit rates
- Power dissipation < 1W
- RoHS-6 compliant ( lead-free )
- Single 3.3V power supply
- Maximum link length of 300m on2000 MHZ-km MMF
- Uncooled 850nm VCSEL laser
- Receiver limiting electrical interface
- Duplex LC Connector
- Built-in digital diagnostic functions
- Commercial temperature range£º 0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)
10Gbps SFP+ 10KMµ¥Ä£¹âÄ£¿é
- Optical interface compliant to IEEE 802.3ae 10GBASE-LR
- Electrical interface compliant to SFF-8431
- Hot Pluggable
- 1310nm DFB transmitter, PIN photo-detector
- Operating case temperature: 0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)
- Low power consumption
- Applicable for 10km SMF connection
- All-metal housing for superior EMI performance
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
10Gbps SFP+ 40KMµ¥Ä£¹âÄ£¿é
- Compliant with SFF-8431 and IEE802.3ae
- Data rate selectable ¡Ü4.25Gbps or 9.95Gbps to 10.3Gbps bit rates
- Cooled EML transmitter and PIN receiver
- link length up to 40km
- Low Power Dissipation 1.5W Maximum
- Operating Case Temperature£º0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)
- Single 3.3V power supply
- Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
10Gbps SFP+ 80KMµ¥Ä£¹âÄ£¿é
- Compliant with SFF-8431 and IEE802.3ae
- Data rate selectable ¡Ü4.25Gbps or 9.95Gbps to 11.3Gbps bit rates
- Cooled EML transmitter and APD receiver
- link length up to 80km
- Low Power Dissipation 1.4W Typical (Maximum:2W)
- Operating Case Temperature:0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)
- Single 3.3V power supply
- Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
BiDi SFP+ 10G 10km
BiDi SFP+ 10G 10kmµ¥ÏËË«ÏòÍòÕ×¹âÄ£¿é£¬Ö§³Ö10G´«ÊäËÙÂÊ£¬·¢É䲿·Ö½ÓÄɵͲü¶¶¡¢¸ßÐÔ ÄÜµÄ 1330nm/1270nm DFB¼¤¹â×é¼þ(1330/1270ÄÉÃײ¨³¤)£¬¿ÉÖ§³Ö×î´ó´«Êä¾àÀë10km¡£Ö§³ÖÈȲå°Î£¬µ¥ÏËË«Ïò´«Ê䣬´ø Êý×ÖÕï¶Ï¼à¿Ø¹¦Ð§£¬Ö§³ÖÉÌÒµ¼¶Î¶ȹæÄ££¨ 0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)£©¡£ Ö÷ÒªÓ¦ÓÃÔÚ10GBASE LR EthernetÒÔÌ«Íø£¬10G LW Fibre Channel¹âÏËͨµÀµÈÁìÓò¡£
BiDi SFP+ 10G 20km
- Supports 9.95Gb/s to 10.3Gb/s data rates
- Simplex LC Connector Bi-Directional SFP+ Optical Transceiver
- Single 3.3V Supply
- Up to 20km on 9/125um SMF
- A:1270nm DFB Laser transmitter,1330nm receiver
- B:1330nm DFB Laser transmitter,1270nm receiver
- Compliant with IEEE 802.3ae 10GBASE-LRand 10GBASE-LW
- SFP+ MSA SFF-8431 Compliant
- Digital Diagnostic SFF-8472 Compliant
- RoHS compliant and Lead Free
- Operating case temperature:0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)